|
COP888CL Datasheet, PDF (36/42 Pages) Texas Instruments – COP888CL 8-Bit Microcontroller | |||
|
◁ |
Development Support (Continued)
IceMASTER DEBUG MODULE (DM)
The iceMASTER IM-COP8/400 is a PC based, combination
in-circuit emulation tool and COP8 based OPT/EPROM pro-
gramming tool developed and marketed by MetaLink Corpo-
ration to support the whole COP8 family of products. Na-
tional is a resale vendor for these products.
See Figure 16 for configuration.
The iceMASTER Debug Module is a moderate cost devel-
opment tool. It has the capability of in-circuit emulation for a
specific COP8 microcontroller and in addition serves as a
programming tool for COP8 OTP and EPROM product fami-
lies. Summary of features is as follows:
⢠Real-time in-circuit emulation; full operating voltage
range operation, full DC-10 MHz clock.
⢠All processor I/O pins can be cabled to an application
development board with package compatible cable to
socket and surface mount assembly.
⢠Full 32 kbyte of loadable programming space that over-
lays (replaces) the on-chip ROM or EPROM. On-chip
RAM and I/O blocks are used directly or recreated on the
probe as necessary.
⢠100 frames of synchronous trace memory. The display
can be HLL source (C source), assembly or mixed. The
most recent history prior to a break is available in the
trace memory.
⢠Configured break points; uses INTR instruction which is
modestly intrusive.
⢠Software â only supported features are selectable.
⢠Tool set integrated interactive symbolic debugger - sup-
ports both assembler (COFF) and C Compiler (.COD)
SDK linked object formats.
⢠Instruction by instruction memory/register changes dis-
played when in single step operation.
⢠Debugger software is processed customized, and recon-
figured from a master model file.
⢠Processor specific symbolic display of registers and bit
level assignments, configured from master model file.
⢠Halt/Idle mode notification.
⢠Programming menu supports full product line of program-
mable OTP and EPROM COP8 products. Program data
is taken directly from the overlay RAM.
⢠Programming of 44PLCC and 68PLCC parts requires
external programming adapters.
⢠Includes wallmount power supply.
⢠On-board VPP generator from 5V input or connection to
external supply supported. Requires VPPlevel adjustment
per the family programming specification (correct level is
provided on an on-screen pop-down display).
⢠ON-Line HELP customized to specific processor using
master model file.
⢠Includes a copy of COP8-DEV-IBMA assembler and
linker SDK.
DM Order Information
Debug Module Unit
COP8-DM/888CF
Cable Adapters
DM-COP8/28D
DM-COP8/40D
DM-COP8/44P
Adapter for SO package
MHW-SO -SOIC28
28 DIP
40 DIP
44 PLCC
28 SO
FIGURE 16. COP8-DM Environment
DS009766-36
35
www.national.com
|
▷ |