COP888CL Datasheet, PDF (35/42 Pages) Texas Instruments – COP888CL 8-Bit Microcontroller

Development Support
SUMMARY
• iceMASTER™ : IM-COP8/400 — Full feature in-circuit
emulation for all COP8 products. A full set of COP8 Basic
and Feature Family device and package specific probes
are available.
• COP8 Debug Module: Moderate cost in-circuit emulation
and development programming unit.
• COP8 Evaluation and Programming Unit:
EPU-COP888GG — low cost in-circuit simulation and de-
velopment programming unit.
• Assembler: COP8-DEV-IBMA. A DOS installable cross
development Assembler, Linker, Librarian and Utility Soft-
ware Development Tool Kit.
• C Compiler: COP8C. A DOS installable cross develop-
ment Software Tool kit.
• OPT/EPROM Programmer Support: Covering needs
from engineering prototype, pilot production to full pro-
duction environments.
IceMASTER (IM) IN-CIRCUIT EMULATION
The iceMASTER IM-COP8/400 is a full feature, PC based,
in-circuit emulation tool developed and marketed by Met-
aLink Corporation to support the whole COP8 family of
products. National is a resale vendor for these products.
See Figure 15 for configuration.
The iceMASTER IM-COP8/400 with its device specific
COP8 Probe provides a rich feature set for developing,
testing and maintaining product:
• Real-time in-circuit emulation; full 2.4V–5.5V operation
range, full DC-10 MHz clock. Chip options are program-
mable or jumper selectable.
• Direct connection to application board by package com-
patible socket or surface mount assembly.
• Full 32 kbyte of loadable programming space that over-
lays (replaces) the on-chip ROM or EPROM. On-chip
RAM and I/O blocks are used directly or recreated on the
probe as necessary.
• Full 4k frame synchronous trace memory. Address, in-
struction, and 8 unspecified, circuit connectable trace
lines. Display can be HLL source (e.g., C source), as-
sembly or mixed.
• A full 64k hardware configurable break, trace on, trace off
control, and pass count increment events.
• Tool set integrated interactive symbolic
debugger — supports both assembler (COFF) and C
Compiler (.COD) linked object formats.
• Real time performance profiling analysis; selectable
bucket definition.
• Watch windows, content updated automatically at each
execution break.
• Instruction by instruction memory/register changes dis-
played on source window when in single step operation.
• Single base unit and debugger software reconfigurable to
support the entire COP8 family; only the probe personal-
ity needs to change. Debugger software is processor
customized, and reconfigured from a master model file.
• Processor specific symbolic display of registers and bit
level assignments, configured from master model file.
• Halt/Idle mode notification.
• On-line HELP customized to specific processor using
master model file.
• Includes a copy of COP8-DEV-IBMA assembler and
linker SDK.
IM Order Information
Base Unit
IM-COP8/400-1
IM-COP8/400-2
iceMASTER Probe
MHW-884CL28DWPC
MHW-888CL40DWPC
MHW-888CL44PWPC
Adapter for SO package
MHW-SO -SOIC28
iceMASTER Base Unit,
110V Power Supply
iceMASTER Base Unit,
220V Power Supply
28 DIP
40 DIP
44 PLCC
28 SO
www.national.com
FIGURE 15. COP8 iceMASTER Environment
34
DS009766-35