MSP430F23X_14 Datasheet, PDF (31/93 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

www.ti.com
MSP430F23x
MSP430F24x(1)
MSP430F2410
SLAS547I – JUNE 2007 – REVISED DECEMBER 2012
Active Mode Supply Current (Into DV_CC and AV_CC) Excluding External Current⁽¹⁾⁽²⁾
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
I_AM,1MHz
Active mode (AM)
current (1 MHz)
TEST CONDITIONS
f_DCO = f_MCLK = f_SMCLK = 1 MHz,
f_ACLK = 32768 Hz,
Program executes in flash,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 0, SCG0 = 0, SCG1 = 0,
OSCOFF = 0
T_A
-40°C to 85°C
105°C
-40°C to 85°C
105°C
V_CC
2.2 V
3V
MIN TYP
275
295
386
417
I_AM,1MHz
Active mode (AM)
current (1 MHz)
f_DCO = f_MCLK = f_SMCLK = 1 MHz,
f_ACLK = 32768 Hz,
Program executes in RAM,
BCSCTL1 = CALBC1_1MHZ,
DCOCTL = CALDCO_1MHZ,
CPUOFF = 0, SCG0 = 0, SCG1 = 0,
-40°C to 85°C
105°C
-40°C to 85°C
105°C
2.2 V
3.3 V
230
248
321
344
OSCOFF = 0
f_MCLK = f_SMCLK = f_ACLK =
32768 Hz/8 = 4096 Hz,
f_DCO = 0 Hz,
-40°C to 85°C
1.5
2.2 V
105°C
6
I_AM,4kHz
Active mode (AM)
current (4 kHz)
Program executes in flash,
SELMx = 11, SELS = 1,
-40°C to 85°C
2
DIVMx = DIVSx = DIVAx = 11,
3V
CPUOFF = 0, SCG0 = 1, SCG1 = 0,
105°C
7
OSCOFF = 0
I_AM,100kHz
Active mode (AM)
current (100 kHz)
f_MCLK = f_SMCLK = f_{DCO(0, 0)} ≈ 100 kHz,
f_ACLK = 0 Hz,
Program executes in flash,
RSELx = 0, DCOx = 0, CPUOFF = 0,
SCG0 = 0, SCG1 = 0, OSCOFF = 1
-40°C to 85°C
105°C
-40°C to 85°C
105°C
2.2 V
3V
55
70
67
84
MAX
312
318
445
UNIT
µA
449
261
267
366 µA
370
3.8
10.5
4.7 _µA
12.2
72
81
µA
89
100
(1) All inputs are tied to 0 V or V_CC. Outputs do not source or sink any current.
(2) The currents are characterized with a Micro Crystal CC4V-T1A SMD crystal with a load capacitance of 9 pF. The internal and external
load capacitance is chosen to closely match the required 9 pF.
Copyright © 2007–2012, Texas Instruments Incorporated
Submit Documentation Feedback
31