DS90C387_15 Datasheet, PDF (3/33 Pages) Texas Instruments – Dual Pixel LVDS Display Interface (LDI)-SVGA/QXGA

DS90C387, DS90CF388
www.ti.com
SNLS012H – MAY 2000 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings⁽¹⁾⁽²⁾
Supply Voltage (V_CC)
CMOS/TTL Input Voltage
CMOS/TTL Output Voltage
LVDS Receiver Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 4 seconds)
Maximum Package Power Dissipation Capacity at 25°C, 100 TQFP
Package
Package Derating
ESD Rating
DS90C387
DS90CF388
DS90C387
DS90CF388
DS90C387
DS90CF388
HBM, 1.5kΩ, 100pF
EIAJ, 0Ω, 200pF
HBM, 1.5kΩ, 100pF
EIAJ, 0Ω, 200pF
−0.3V to +4V
−0.3V to +5.5V
−0.3V to (V_CC + 0.3V)
−0.3V to +3.6V
−0.3V to +3.6V
Continuous
+150°C
−65°C to +150°C
+260°C
2.8W
2.8W
18.2mW/°C above +25°C
18.2mW/°C above +25°C
> 6 kV
> 300 V
> 2 kV
> 200 V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the device should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
Supply Voltage (V_CC)
Operating Free Air Temperature (T_A)
Receiver Input Range
Supply Noise Voltage (V_CC)
Min
Nom
Max
3.0
3.3
3.6
−10
+25
+70
0
2.4
100
Unit
V
°C
V
mV_p-p
Electrical Characteristics⁽¹⁾
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
CMOS/TTL DC SPECIFICATIONS (Tx inputs, Rx outputs, control inputs and outputs)
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_OH
High Level Output Voltage I_OH = −0.4 mA
I_OH = −2 mA
V_OL
Low Level Output Voltage I_OL = 2 mA
V_CL
Input Clamp Voltage
I_CL = −18 mA
I_IN
Input Current
V_IN = 0.4V, 2.5V or V_CC
V_IN = GND
I_OS
Output Short Circuit Current V_OUT = 0V
2.0
5.0
V
GND
0.8
V
2.7
2.9
V
2.7
2.85
V
0.1
0.3
V
−0.79
−1.5
V
+1.8
+15
µA
−15
0
µA
−120
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V_OD and ΔV_OD).
Copyright © 2000–2013, Texas Instruments Incorporated
Submit Documentation Feedback
3
Product Folder Links: DS90C387 DS90CF388