DS125BR800 Datasheet, PDF (24/59 Pages) Texas Instruments – Low-Power 12.5-Gbps 8-Channel Repeater With Input Equalization and Output De-Emphasis

DS125BR800
SNLS426E – AUGUST 2012 – REVISED JANUARY 2015
www.ti.com
8.5.6 Reading a Register
To read a register, the following protocol is used (see SMBus 2.0 specification).
1. The Host drives a START condition, the 7-bit SMBus address, and a "0" indicating a WRITE.
2. The Device (Slave) drives the ACK bit ("0").
3. The Host drives the 8-bit Register Address.
4. The Device drives an ACK bit ("0").
5. The Host drives a START condition.
6. The Host drives the 7-bit SMBus Address, and a "1" indicating a READ.
7. The Device drives an ACK bit "0".
8. The Device drives the 8-bit data value (register contents).
9. The Host drives a NACK bit "1"indicating end of the READ transfer.
10. The Host drives a STOP condition.
The READ transaction is completed, the bus goes IDLE and communication with other SMBus devices may now
occur.
24
Submit Documentation Feedback
Copyright © 2012–2015, Texas Instruments Incorporated
Product Folder Links: DS125BR800