TLK2711-SP_15 Datasheet, PDF (21/29 Pages) Texas Instruments – 1.6-Gbps to 2.5-Gbps Class V Transceiver

www.ti.com
9 Application and Implementation
TLK2711-SP
SGLS307N – JULY 2006 – REVISED DECEMBER 2015
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
9.1 Application Information
The TLK2711-SP may be operated as full link with send/receive functions or each end of link may be transmit
only or receive only.
The transmitter is always operational in either case as GTX_CLK is required to source the PLL. In transmit only
cases, LCKREFN can be pulled low to disable the RX interface. See Power-On Reset for requirements.
Copyright © 2006–2015, Texas Instruments Incorporated
Submit Documentation Feedback
21