English
Language : 

TMS320DM8148 Datasheet, PDF (1/343 Pages) Texas Instruments – TMS320DM814x DaVinci™ Digital Media Processors
TMS320DM8148, TMS320DM8147
www.ti.com
TMS320DM814x DaVinci™
Digital Media Processors
Check for Samples: TMS320DM8148, TMS320DM8147
SPRS647 – MARCH 2011
1 High-Performance System-on-Chip (SoC)
1.1 Features
123
• High-Performance DaVinci™ Digital Media
Processors
– Up to 1-GHz ARM® Cortex™-A8 RISC MPU
– Up to 2000 ARM® Cortex™-A8 MIPS
– Up to 750-MHz C674x™ VLIW DSP
– 6000/4500 C674x™ MIPS/MFLOPS
– Fully Software-Compatible with C67x+™,
C64x+™
• ARM® Cortex™-A8 Core
– ARMv7 Architecture
• In-Order, Dual-Issue, Superscalar
Microprocessor Core
• NEON™ Multimedia Architecture
• Supports Integer and Floating Point
• Jazelle® RCT Execution Environment
• ARM® Cortex™-A8 Memory Architecture
– 32K-Byte Instruction and Data Caches
– 512K-Byte L2 Cache
– 64K-Byte RAM, 48K-Byte Boot ROM
• TMS320C674x™ Floating-Point VLIW DSP
– 64 General-Purpose Registers (32-Bit)
– Six ALU (32-/40-Bit) Functional Units
• Supports 32-Bit Integer, SP (IEEE Single
Precision/32-Bit) and DP (IEEE Double
Precision/64-Bit) Floating Point
• Supports up to Four SP Adds Per Clock
and Four DP Adds Every Two Clocks
• Supports up to Two Floating-Point (SP or
DP) Approximate Reciprocal or Square
Root Operations Per Cycle
– Two Multiply Functional Units
• Mixed-Precision IEEE Floating-Point
Multiply Supported up to:
– 2 SP x SP → SP Per Clock
– 2 SP x SP → DP Every Two Clocks
– 2 SP x DP → DP Every Three Clocks
– 2 DP x DP → DP Every Four Clocks
• Fixed-Point Multiply Supports Two 32 x
32 Multiplies, Four 16 x 16-bit Multiplies
including Complex Multiplies, or Eight 8 x
8-Bit Multiplies per Clock Cycle
• C674x™ Two-Level Memory Architecture
– 32K-Byte L1P RAM/Cache With EDC
– 32K-Byte L1D RAM/Cache
– 256K-Byte L2 Unified Mapped RAM/Caches
With ECC
• DSP/EDMA Memory Management Unit
(DEMMU)
– Maps C674x DSP and EDMA TC Memory
Accesses to System Addresses
• 128K-Bytes On-Chip Memory Controller
(OCMC) RAM
• Imaging Subsystem (ISS)
– Camera Sensor Connection
• Parallel Connection for Raw (up to 16-Bit)
and BT.656/BT.1120 (8-/16-bit)
– Image Sensor Interface (ISIF) for Handling
Image/Video Data From the Camera Sensor
– Resizer
• Resizing Image/Video From 1/16x to 8x
• Generating Two Different Resizing
Outputs Concurrently
• Programmable High-Definition Video Image
Coprocessing (HDVICP v2) Engine
– Encode, Decode, Transcode Operations
– H.264, MPEG2, VC1, MPEG4, SP/ASP,
JPEG/MJPEG
• Media Controller
– Controls the HDVPSS, HDVICP2, and ISS
• SGX530 3D Graphics Engine
– Delivers up to 18 MPoly/sec
– Universal Scalable Shader Engine
– Direct3D Mobile, OpenGLES 1.1 and 2.0,
OpenVG 1.0, OpenMax API Support
– Advanced Geometry DMA Driven Operation
– Programmable HQ Image Anti-Aliasing
• Endianness
– ARM/DSP Instructions/Data – Little Endian
• HD Video Processing Subsystem (HDVPSS)
– Two 148.5 MHz HD Video Capture Inputs
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
DSP/BIOS, XDS are trademarks of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCT PREVIEW information concerns products in the formative
or design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right
to change or discontinue these products without notice.
Copyright © 2011, Texas Instruments Incorporated