BQ24296_15 Datasheet, PDF (11/55 Pages) Texas Instruments – bq2429x I2C Controlled 3-A Single Cell USB Charger With Narrow VDC Power Path Management and Adjustable Voltage USB OTG

www.ti.com
bq24296, bq24297
SLUSBP6B – SEPTEMBER 2013 – REVISED NOVEMBER 2014
8.6 Timing Requirements
VBUS/BAT POWER UP
t_BADSRC
Bad source detection duration
BOOST MODE OPERATION
t_{OTG_OCP_OFF}
t_{OTG_OCP_ON}
QON TIMING
OTG mode over-current protection off cycle time
OTG mode over-current protection on cycle time
t_QON
QON pin high time to turn on BATFET
DIGITAL CLOCK AND WATCHDOG TIMER
t_WDT
REG05[5:4] = 11
REGN LDO disabled
REGN LDO enabled
MIN TYP MAX UNIT
30
ms
32
ms
260
µs
2
ms
112 160
sec
136 160
Figure 1. I²C-Compatible Interface Timing Diagram
8.7 Typical Characteristics
Table 1. Table of Figures
Charging Efficiency vs Charging Current (DCR = 10 mΩ)
System Efficiency vs System Load Current (DCR = 10 mΩ)
Boost Mode Efficiency vs VBUS Load Current (DCR = 10 mΩ)
SYS Voltage Regulation vs System Load Current
Boost Mode VBUS Voltage Regulation (Typical Output = 4.998 V, REG06[7:4] = 0111) vs VBUS Load Current
SYS Voltage vs Temperature
BAT Voltage vs Temperature
Input Current Limit vs Temperature
Charge Current vs Package Temperature
FIGURE
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Copyright © 2013–2014, Texas Instruments Incorporated
Product Folder Links: bq24296 bq24297
Submit Documentation Feedback
11