SM59R16A5 Datasheet, PDF (45/89 Pages) SyncMOS Technologies,Inc – Two serial peripheral interfaces in full duplex mode

SM59R16A5/SM59R09A5/SM59R05A5
8-Bit Micro-controller
64KB/36KB/20KB with ISP Flash
& 2KB RAM embedded
9.1.4. Mode 3
The only difference between Mode 2 and Mode 3 is that: in Mode 3, either internal baud rate generator or timer 1 can be
use to specify baud rate.
Fig. 9-5: Transmit modes 2 and 3 for Serial 0
Fig. 9-6: Receive modes 2 and 3 for Serial 0
9.2. Serial interface 1
The interrupt vector is 83h.
The Serial Interface 1 can operate in the following 2 modes:
SM Mode
Description
0
A 9-bit UART
1
B 8-bit UART
Baud Rate
Variable
Variable
9.2.1. Mode A
This mode is similar to Mode 2 and 3 of Serial interface 0, 11 bits are transmitted or received: a start bit (0), 8 data bits
(LSB first), a programmable Bit 9, and a stop bit (1). Bit 9 can be used to control the parity of the serial interface: at
transmission, bit TB81 in S1CON is outputted as Bit 9, and at receive, Bit 9 affects RB81 in SFR S1CON.
Fig. 9-7: Transmit mode A for Serial 1
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M047
45
Ver.H SM59R16A5 04/2015