SM59R16A5 Datasheet, PDF (15/89 Pages) SyncMOS Technologies,Inc – Two serial peripheral interfaces in full duplex mode

SM59R16A5/SM59R09A5/SM59R05A5
8-Bit Micro-controller
64KB/36KB/20KB with ISP Flash
& 2KB RAM embedded
Function Description
1. General Features
SM59R16A5 is an 8-bit micro-controller。All of its functions and the detailed meanings of SFR will be given in the following
sections。
1.1. Embedded Flash
The program can be loaded into the embedded 64KB/36KB/20KB Flash memory via writer or In-System Programming
(ISP)。
1.2. IO Pads
The SM59R16A5 has six I/O ports: Port 0, Port 1, Port 2, Port 3, Port 4, and Port 5. Ports 0, 1, 2, 3, 4 are 8-bit ports and
Port 5 is a 6-bit port. These are: quasi-bidirectional (standard 8051 port outputs), push-pull, open drain, and input-only. As
description in section 5。
The OCI_SCL、ALE、OCI_SDA and RESET can be configured as I/O ports P4.4、P4.5、P4.6 and P4.7 by writer or in ISP
mode.
The XTAL2 and XTAL1 can be configured as I/O ports P5.4 and P5.5 by writer or in ISP mode, when the on-chip
RC-Oscillator is set to main system clock source.
All the pins on P0 ~ P5 are with slew rate adjustment to reduce EMI. The other way to reduce EMI is to disable the ALE
output if unused. This is selected by its SFR. The IO pads can withstand 4KV ESD in human body mode guaranteeing the
SM59R16A5’s quality in high electro-static environments.
1.3. 2T/1T Selection
The conventional 52-series MCUs are 12T, i.e., 12 oscillator clocks per machine cycle. SM59R16A5 is a 2T or 1T MCU,
i.e., its machine cycle is two-clock or one-clock. In the other words, it can execute one instruction within two clocks or
only one clock. The difference between 2T mode and 1T mode are given in the example in Fig. 1-1.
Fig. 1-1(a): The waveform of internal instruction signal in 2T mode
Fig. 1-1(b): The waveform of internal instruction signal in 1T mode
The default is in 2T mode, and it can be changed to 1T mode if IFCON [7] (at address 8Fh) is set to high any time. Not
every instruction can be executed with one machine cycle. The exact machine cycle number for all the instructions are
given in the next section.
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M047
15
Ver.H SM59R16A5 04/2015