SM59R16A5 Datasheet, PDF (36/89 Pages) SyncMOS Technologies,Inc – Two serial peripheral interfaces in full duplex mode

SM59R16A5/SM59R09A5/SM59R05A5
8-Bit Micro-controller
64KB/36KB/20KB with ISP Flash
& 2KB RAM embedded
7.2. Timer/counter control register (TCON)
Mnemonic: TCON
7
6
5
4
3
TF1 TR1 TF0 TR0
IE1
Address: 88h
2
1
0 Reset
IT1
IE0
IT0 00h
TF1: Timer 1 overflow flag set by hardware when Timer 1 overflows. This flag can
be cleared by software and is automatically cleared when interrupt is
processed.
TR1: Timer 1 Run control bit. If cleared, Timer 1 stops.
TF0: Timer 0 overflow flag set by hardware when Timer 0 overflows. This flag can
be cleared by software and is automatically cleared when interrupt is
processed.
TR0: Timer 0 Run control bit. If cleared, Timer 0 stops.
IE1: Interrupt 1 edge flag. Set by hardware, when falling edge on external pin INT1
is observed. Cleared when interrupt is processed.
IT1: Interrupt 1 type control bit. Selects falling edge or low level on input pin to
cause interrupt.
IE0: Interrupt 0 edge flag. Set by hardware, when falling edge on external pin INT0
is observed. Cleared when interrupt is processed.
IT0: Interrupt 0 type control bit. Selects falling edge or low level on input pin to
cause interrupt.
Specifications subject to change without notice contact your sales representatives for the most recent information.
ISSFD-M047
36
Ver.H SM59R16A5 04/2015