LSM6DS3US Datasheet, PDF (42/104 Pages) STMicroelectronics – iNEMO inertial module: always-on 3D accelerometer and 3D gyroscope

Application hints
LSM6DS3US
7.2
LSM6DS3US electrical connections in Mode 2
Figure 16. LSM6DS3US electrical connections in Mode 2
6'26$
06'$
06&/
,17



 1& ^
723
9,(:
1&^
9GG

 ^0'5'<,17
9''


&
Q)
*1'
&
9GGB,2
Q)
*1'
0RGH
+267
,^&63,Z
/60'686
0DVWHU,^&
«
«
([WHUQDOVHQVRUV
,^&FRQILJXUDWLRQ
9GGB,2
5_SX
5_SX
6&/
6'$
3XOOXSWREHDGGHG
5_SX N2KP
1. Leave pin electrically unconnected and soldered to PCB.
The device core is supplied through the Vdd line. Power supply decoupling capacitors (C1,
C2 = 100 nF ceramic) should be placed as near as possible to the supply pin of the device
(common design practice).
The functionality of the device and the measured acceleration/angular rate data is
selectable and accessible through the SPI/I²C interface.
The functions, the threshold and the timing of the two interrupt pins for each sensor can be
completely programmed by the user through the SPI/I²C interface.
42/104
DocID028476 Rev 4