LSM330DL Datasheet, PDF(36/54 Page) STMicroelectronics – Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

LSM330DL Datasheet, PDF (36/54 Pages) STMicroelectronics – Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor

◁

Registers description

LSM330DL

Table 46. INT1_SRC_A description

X high. Default value: 0

(0: no interrupt, 1: X high event has occurred)

X low. Default value: 0

(0: no interrupt, 1: X low event has occurred)

The Interrupt 1 source register is a read-only register.

Reading at this address clears the INT1_SRC_A IA bit (and the interrupt signal on the

INT1_A pin) and allows the refreshment of data in the INT1_SRC_A register if the latched

option was chosen.

7.16

INT1_THS_A (32h)

Table 47. INT1_THS_A register

0(1)

THS6

THS5

THS4

1. This bit has to be set to â0â for correct operation.

THS3

THS2

Table 48. INT1_THS_A description

THS6 - THS0 Interrupt 1 threshold. Default value: 000 0000

THS1

THS0

7.17 INT1_DURATION_A (33h)

Table 49. INT1_DURATION_A register

0(1)

1. This bit has to be set to â0â for correct operation.

Table 50. INT1_DURATION_A description

D6 - D0

Duration value. Default value: 000 0000

The D6 - D0 bits set the minimum duration of the Interrupt 1 event to be recognized. The

duration of the steps and maximum values depend on the ODR chosen.

7.18 CLICK_CFG _A (38h)

Table 51. CLICK_CFG_A register

36/54

Doc ID 022018 Rev 1

▷