LSM330DL Datasheet, PDF (16/54 Pages) STMicroelectronics – Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor

Module specifications
LSM330DL
2.5
Absolute maximum ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage
to the device. This is a stress rating only and functional operation of the device under these
conditions is not implied. Exposure to maximum rating conditions for extended periods may
affect device reliability.
Table 8.
Symbol
Absolute maximum ratings
Ratings
Vdd Supply voltage
Vdd_IO I/O pins supply voltage
Vin
Input voltage on any control pin
(SCL_A/G, SDA/SDI_A/G, SDO_A/G, CS_A/G)
A_POW Acceleration (any axis, powered, Vdd = 3 V)
A_UNP Acceleration (any axis, unpowered)
T_OP
T_STG
ESD
Operating temperature range
Storage temperature range
Electrostatic discharge protection
Maximum value
Unit
-0.3 to 4.8
V
-0.3 to 4.8
V
-0.3 to Vdd_IO +0.3 V
3000 g for 0.5 ms
10000 g for 0.1 ms
3000 g for 0.5 ms
10000 g for 0.1 ms
-40 to +85
°C
-40 to +125
°C
2 (HBM)
kV
Note:
Supply voltage on any pin should never exceed 4.8 V
This is a device sensitive to mechanical shock, improper handling can cause
permanent damage to the part
This is an ESD-sensitive device, improper handling can cause permanent damage to
the part
16/54
Doc ID 022018 Rev 1