LSM320HAY30 Datasheet, PDF (12/42 Pages) STMicroelectronics – MEMS motion sensor module: 3D digital accelerometer and 2D pitch and yaw analog gyroscope

Mechanical and electrical specifications
LSM320HAY30
Table 3. Electrical characteristics (continued)
Symbol
Parameter
Test condition
Min.
Typ.⁽¹⁾
Max.
Unit
AR_VST Angular rate self-test input
Logic 0 level
Logic 1 level
AR_VPD Angular rate power-down input
Logic 0 level
Logic 1 level
LA_VIH
Linear acceleration digital high
level input voltage
LA_VIL
Linear acceleration digital low level
input voltage
LA_VOH
Linear acceleration high level
output voltage
LA_VOL
Linear acceleration low level
output voltage
DR bit set to 00
LA_ODR
Linear acceleration output data
rate in normal mode
DR bit set to 01
DR bit set to 10
DR bit set to 11
PM bit set to 010
LA_ODR_LP
Linear acceleration output data
rate in low-power mode
PM bit set to 011
PM bit set to 100
PM bit set to 101
PM bit set to 110
LA_Ton Linear acceleration turn-on time⁽³⁾ ODR = 100 Hz
AR_Ton
Top
Angular rate turn-on time⁽⁴⁾
Operating temperature range
0
0.8*Vdd
0
0.8*Vdd
0.8*Vdd_IO
0.2*Vdd
V
Vdd
0.2*Vdd
V
Vdd
V
0.2*Vdd_IO V
0.9*Vdd_IO
V
0.1*Vdd_IO V
50
100
Hz
400
1000
0.5
1
2
Hz
5
10
1/ODR+1
ms
s
200
ms
-40
+85
°C
1. Typical specifications are not guaranteed
2. It is possible to remove Vdd, maintaining Vdd_IO without blocking the communication buses. In this condition the
measurement chain is powered off.
3. Time to obtain valid data after exiting power-down mode
4. Time to obtain valid data after exiting power-down mode
12/42
Doc ID 16917 Rev 1