English
Language : 

SIO10N268 Datasheet, PDF (27/251 Pages) SMSC Corporation – Advenced Notebook I/O for ISA or LPC Designs with X-Bus Interface for I/O, Memory, and FWH Emulation and Four Srial Ports
Advanced Notebook I/O for ISA or LPC Designs
Datasheet
Note 4.18 This buffer type is different from the buffer types shown per function because it is a mode dependent pin
that supports alternate ‘mode dependent’ functions that require additional buffer types.
Note 4.19
The PCI Clock is considered part of the LPC Interface when the device is configured for LPC Mode and it
is also considered part of the ISA Interface when the device is configured for ISA Mode. In LPC Mode,
the PCI Clock must always be driven by the 33MHz PCI Clock source. In ISA Mode, the PCI Clock is
used to support serial IRQs. If serial IRQs are not supported then the PCI Clock input may be connected
to the 33MHz PCI Clock or the 14MHz clock source.
SMSC SIO10N268
Page 27
DATASHEET
Rev. 0.5 (03-24-05)