|
SI47XX-EVB Datasheet, PDF (47/164 Pages) Silicon Laboratories – Thank you for purchasing the Silicon Laboratories | |||
|
◁ |
Si47xx-EVB
5.6. FM Transmitter Settings (Digital Mode) Property Window
FM transmitter settings can be configured through the properties window by selecting Windowï®Properties.
Properties are grouped into categories which can be selected from the drop-down box in the upper right of the
window. For convenience, all FM transmitter properties are also located in Windowï®Properties ï®TX: All. Digital
mode properties will be available if CODED or SPDIF modes was selected in the initialization window.
Figure 40. FM Transmitter Settings in Digital Mode Property Window
Table 10. FM Transmitter Settings in Digital Mode Property Window Descriptions
Item
Description
Range
Reference Clock
Frequency (Hz)
Reference Clock
Prescaler
Digital Format
Digital Sample
Precision
Digital Sample
Rate (Hz)
This field is used to specify the frequency of the refer-
ence clock. The input to the RCLK pin divided by the
prescaler is the reference clock. The reference clock
must be in the range of 31130 to 34406 Hz.
This field is used to specify the prescaler value. The
input to the RCLK pin divided by the prescaler is the
reference clock. The reference clock must be in the
range of 31130 to 34406 Hz.
Sets I2S of left justified digital format.
Select the precision of the digital audio input.
Sets the DFS digital sample rate. Must be set to 0 Hz
before DCLK/DFS is removed.
31130â34406 Hz
1â4095
Left-Justified, I2S,
DSP (MSB on first
DCLK), or DSP
(MSB on second
DCLK)
8, 16, 20, 24 bits
0, 32000â
48000 Hz
Applicable
Devices
All
All
All except
Si4710-A10
All
All except
Si4710-A10
Rev. 0.8
47
|
▷ |