SI47XX-EVB Datasheet, PDF (36/164 Pages) Silicon Laboratories – Thank you for purchasing the Silicon Laboratories

Si47xx-EVB
4.2.3.6. Bus Mode
This setting affects all functions that are configured. It allows the device to be booted either in 2-wire or 3-wire
mode.
4.2.3.7. Internal Oscillator
When the "Use XOSCEN" is enabled and the board is configured to use the crystal oscillator, the GUI will boot the
device using the crystal oscillator. This option is only available on devices that support the crystal oscillator option.
4.2.3.8. Auto Boot when UI Opened and only One Board is Connected
When this item is selected, the GUI, when launched, will automatically boot the board if the same board is
connected. If more than one board is connected, the GUI will display the initialization dialog to allow selection of
the board to initialize.
4.3. Switching Functions
After the board has been properly configured for all functions it is possible to switch between functions from the
main UI window using the function buttons provided. Only function buttons will appear for the functions supported
by the device currently running. Figure 29 highlights the buttons used to switch functions from the main screen.
Figure 29. Function Switch Buttons
36
Rev. 0.8