SI47XX-EVB Datasheet, PDF (39/164 Pages) Silicon Laboratories – Thank you for purchasing the Silicon Laboratories

Si47xx-EVB
4.4.5. Export Saved State
In addition to saving, retrieving, and deleting the configuration state, the GUI also gives the end user the ability to
export the configuration state to a file. The file can then be imported to installations of the GUI on different
machines to allow multiple users to easily implement the same configuration state. To export a saved configuration
state to a file, select File State ManagementExport Saved State and the Select Configuration window will pop
as shown in Figure 34. Select the configuration state to export and click OK to save the configuration file with a .ini
extension. This configuration file can now be exported to different machines. The name of the saved state is
retained in the file when exported.
Figure 34. Selecting Configuration State to Export
4.4.6. Import Saved State
A saved configuration state can be imported from a .ini file exported by another instance of the GUI. To import a
saved state, select FileState Management Import State File, then browse for and select the desired file. Once
the file has been imported, the saved state will appear in the Default Mode list in the Initialization window. If a state
already exists with the same name as the state in the imported file, the GUI will give you the option of replacing the
original state, choosing a new name for the imported state, or canceling the import from file. The name appearing
in the initialization window will not necessarily be the same as the *.ini file name exported. It will reflect the name of
the original state that was exported.
4.5. Disconnecting the EVB
The GUI provides three methods for disconnecting the device: Closing the GUI, choosing disconnect from the file
menu, or physically disconnecting the device from the PC.
When closing the UI or selecting disconnect from the file menu, the GUI will prompt if the device should be
powered down or not. This prompt allows for further investigation of the device after the GUI has been
disconnected from the EVB. After the board has been disconnected through the File menu, the GUI will save the
current state of the device to disk. This state will be used to power up the device in the same state next time the
board is connected. The GUI will only save the current state if the board is disconnected through the File menu or
the GUI application is closed. If the board is removed from the PC without being disconnected through the File
menu and before the GUI is closed, then all state data will be lost.
Rev. 0.8
39