SI8250 Datasheet, PDF (4/30 Pages) Silicon Laboratories – DIGITAL POWER CONTROLLER

Si8250/1/2
1. Electrical Specifications
Table 1. Absolute Maximum Ratings*
Parameter
Conditions
Min.
Typ.
Max.
Units
Ambient Temperature under Bias
–55
—
+135
°C
Storage Temperature
–65
—
+150
°C
Voltage on any Port0 Pin with respect to GND
–0.3
—
5.5
V
Voltage on all other pins with respect to GND
–0.3
—
4.0
V
Voltage on VDD with respect to GND
–0.3
—
4.0
V
Maximum total current through VDD or GND
—
—
400
mA
Maximum output current sunk by RST or any
Port pin
—
—
80
mA
*Note: Stresses above those listed under "2.1 Absolute Maximum Ratings" may cause permanent damage to the device. This
is a stress rating only, and functional operation of the devices at those or any other conditions above those indicated in
the operation listings of this specification is not implied. Exposure to maximum rating conditions for extended periods
may affect device reliability.
Table 2. DC Electrical Specifications
TA = –40 to +125 °C, VDD = 2.5 V, SYSCLK = 25 MHz, PLLCLK = 200 MHz unless otherwise specified.
Parameter
Conditions
Min
Typ
Supply Voltage
2.25
—
Supply Current, all Peripherals
Enabled
Lockout mode supply current
Analog + digital supply current. —
26
Analog + digital supply current. —
300
(See Table 1 on page 4)
Digital Supply Current (shutdown) Oscillator not running, VDD mon- —
—
itor disabled
Digital Supply RAM Data Retention
Voltage
—
1.5
Max
2.75
—
—
TBD
—
Units
V
mA
µA
µA
V
4
Preliminary Rev. 0.8