SAB80C515A-5 Datasheet, PDF (95/108 Pages) Siemens Semiconductor Group – 8-Bit CMOS Single-Chip Microcontroller Family

SAB 80C515A/83C515A-5
Absolute Maximum Ratings
Ambient temperature under bias
Storage temperature
Voltage on V_CC pins with respect to ground (V_SS)
Voltage on any pin with respect to ground (V_SS)
Input current on any pin during overload condition
Absolute sum of all input currents during overload condition
Power dissipation
– 40 to 85 ˚C
– 65 to 150 ˚C
– 0.5 V to 6.5 V
– 0.5 to V_CC + 0.5 V
– 10mA to + 10 mA
|100 mA|
1W
Note
Stresses above those listed under "Absolute Maximum Ratings" may cause permanent
damage of the device. This is a stress rating only and functional operation of the device
at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for longer
periods may affect device reliability. During overload conditions (V_IN > V_CC or V _IN < V_SS)
theVoltage on V_CC pins with respect to ground (V_SS) must not exeed the values defind-
ed by the absolute maximum ratings.
DC Characteristics
V_CC = 5 V + 10 %, – 15 %; V_SS = 0 V
T _A = 0 to 70 ˚C for the SAB 80C515A
T _A = – 40 to 85 ˚C for the SAB 80C515A-T3
Parameter
Symbol
Limit Values Unit Test condition
Input low voltage
V_IL
(exept EA,RESET, HWPD)
Input low voltage EA
V_{I L1}
Input low voltage
V_{I L2}
(HWPD, RESET)
Input high voltage (exept
V_IH
RESET, XTAL2 and HWPD)
Input high voltage to XTAL2 V_IH1
Input high voltage to RESET V_IH2
and HWPD
min.
max.
– 0.5
0.2 V_CC V
–
– 0.1
– 0.5
0.2 V_CC V
–
– 0.3
– 0.5
0.2 V_CC V
–
+ 0.1
0.2 V_CC V_CC + 0.5 V
–
+ 0.9
0.7 V_CC V_CC + 0.5 V
–
0.6 V_CC V_CC + 0.5 V
–
Semiconductor Group
6-43