SAB80C515A-5 Datasheet, PDF (35/108 Pages) Siemens Semiconductor Group – 8-Bit CMOS Single-Chip Microcontroller Family

On-Chip Peripheral Components
P1 and p3 are not active during Hardware Power Down.
P1 is activated only for two oscillator periods if a 0-to-1 transition is programmed to the port pin (not
possible during HWPD).
P3 is turned off during reset state (also HWPD).
For detailed description of the port structure please refer to the SAB 80C515/80C535 User’s
Manual.
Semiconductor Group
5-2