LC822973 Datasheet, PDF (6/27 Pages) Sanyo Semicon Device – CMOS LSI TV Image Viewer LSI

Structure
Outline Specification
Item
NTSC/PAL video encoder
DAC
CPU I/F
Video I/F
Memory controller
Matrix (CPU I/F)
Matrix (Video I/F)
PLL
OSD
Scaling function
Autoview function
V-blanking period.
I/O
Operation temperature
Package
Power voltage (IO)
Power voltage
(digital core)
Power voltage (PLL)
Power voltage
(for stacked SDRAM)
Power voltage
(DAC analog part)
LC822973
Outline
Multi rate and multi format video encoder that supports NTSC/PAL and ITU-601/SQ (square pixel).
10bit-1chD/A converter that integrates 7Ω driver.
Can be connected to TV directly without OP-amp or buffer.
Support 8/9/16/18/24bit bus (D, WR, RD, CS, A0) of I80 type.
It corresponds to 5 format of RGB565, RGB666, YUV422 (8bit), YUV422 (8bit_BT656mode), and YUV422
(16bit). The writing operation is executed based on Sync signals.
Controls built-in (MCP) 16MbitSDRAM. Owns arbitration function and CPU access (drawing) is possible
as needed.
Performs RGB → YUV conversion at the time of CPU → memory writing.
Performs RGB → YUV conversion at the time of video port → memory writing.
Generates high-speed clock for SDRAM.
A reading binary image from SDRAM is displayed in TV. Because the Alfa blend function is installed, it is
possible to select four stages by blend register.
×4 scaling processing at maximum is executed for reading image from SDRAM.
Can be set to H and V direction independently.
The issue of the command of each screen is unnecessary. Writing/reading control in the image area (two
bank or3 bank) set beforehand is executed automatically.
Can insert CGMS-A/WSS code into V-blanking period.
CMOS interface
-30°C to 85°C
ISB63 4mm × 5mm
VQFN84 10mm × 10mm
DVDDIO (1.6V - 3.4V)
for ex. : 1.8V (1.6V - 2.0V), 3.0V (2.5V - 3.4V)
1.5V (1.35V - 1.65V)
1.5V (1.35V - 1.65V)
3.0V (2.7V - 3.4V)
3.0V (2.7V - 3.4V)
No.A2131-6/27