R0E00008AKCE00EP62 Datasheet, PDF (75/82 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 5 Differences between the MCUs and the Emulator
21. Processing at Emulator Activation
When the emulator is activated, the watchdog timer is not active; the operation of the emulator
differs from that of the MCU.
22. The H8/36902F and H8/36912F have an on-chip oscillator. If the flash memory area is
rewritten during debugging, the on-chip oscillator will be used even if an external clock is in
use. To use these devices, select 8 MHz as the frequency value when the emulator is being
connected.
23. Items Set in the [Configuration] Dialog Box
The emulator operation conditions are set in the [Configuration] dialog box.
Figure 5.4 [Configuration] Dialog Box ([System] Page)
Rev. 1.00 Aug.03, 2009 Page 19 of 22
REJ10J2022-0100