R0E00008AKCE00EP62 Datasheet, PDF (62/82 Pages) Renesas Technology Corp – Microcomputer Development Environment System

Section 2 Connecting the Emulator with the User System
Notes: 1. The pin number assignments of the 14-pin connector differ from those of the
E10A-USB emulator; however, the physical location is the same.
2. Do not place any components within 3 mm of the connector.
3. When the emulator is used in the [Program Flash] mode, connect the emulator
similarly to the user system.
Rev. 1.00 Aug.03, 2009 Page 6 of 22
REJ10J2022-0100