M16C30P Datasheet, PDF (33/57 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/30P Group
5. Electrical Characteristics
VCC1=VCC2=5V
Timing Requirements
(VCC1 = VCC2 = 5V, VSS = 0V, at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified)
Table 5.19 Timer B Input (Counter Input in Event Counter Mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN Input Cycle Time (counted on one edge)
TBiIN Input HIGH Pulse Width (counted on one edge)
TBiIN Input LOW Pulse Width (counted on one edge)
TBiIN Input Cycle Time (counted on both edges)
TBiIN Input HIGH Pulse Width (counted on both edges)
TBiIN Input LOW Pulse Width (counted on both edges)
Standard
Unit
Min.
Max.
100
ns
40
ns
40
ns
200
ns
80
ns
80
ns
Table 5.20 Timer B Input (Pulse Period Measurement Mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN Input Cycle Time
TBiIN Input HIGH Pulse Width
TBiIN Input LOW Pulse Width
Standard
Unit
Min.
Max.
400
ns
200
ns
200
ns
Table 5.21 Timer B Input (Pulse Width Measurement Mode)
Symbol
tc(TB)
tw(TBH)
tw(TBL)
Parameter
TBiIN Input Cycle Time
TBiIN Input HIGH Pulse Width
TBiIN Input LOW Pulse Width
Table 5.22 A/D Trigger Input
Symbol
tc(AD)
tw(ADL)
Parameter
ADTRG Input Cycle Time
ADTRG input LOW Pulse Width
Table 5.23 Serial Interface
Symbol
tc(CK)
tw(CKH)
tw(CKL)
td(C-Q)
th(C-Q)
tsu(D-C)
th(C-D)
Parameter
CLKi Input Cycle Time
CLKi Input HIGH Pulse Width
CLKi Input LOW Pulse Width
TXDi Output Delay Time
TXDi Hold Time
RXDi Input Setup Time
RXDi Input Hold Time
Table 5.24 External Interrupt INTi Input
Symbol
tw(INH)
tw(INL)
Parameter
INTi Input HIGH Pulse Width
INTi Input LOW Pulse Width
Standard
Unit
Min.
Max.
400
ns
200
ns
200
ns
Standard
Unit
Min.
Max.
1000
ns
125
ns
Standard
Unit
Min.
Max.
200
ns
100
ns
100
ns
80
ns
0
ns
70
ns
90
ns
Standard
Unit
Min.
Max.
250
ns
250
ns
Rev.1.22 Mar 30, 2007 Page 33 of 53
REJ03B0088-0122