M16C30P Datasheet, PDF (32/57 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/30P Group
5. Electrical Characteristics
VCC1=VCC2=5V
Timing Requirements
(VCC1 = VCC2 = 5V, VSS = 0V, at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified)
Table 5.13 Timer A Input (Counter Input in Event Counter Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN Input Cycle Time
TAiIN Input HIGH Pulse Width
TAiIN Input LOW Pulse Width
Standard
Unit
Min.
Max.
100
ns
40
ns
40
ns
Table 5.14 Timer A Input (Gating Input in Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN Input Cycle Time
TAiIN Input HIGH Pulse Width
TAiIN Input LOW Pulse Width
Standard
Unit
Min.
Max.
400
ns
200
ns
200
ns
Table 5.15 Timer A Input (External Trigger Input in One-shot Timer Mode)
Symbol
tc(TA)
tw(TAH)
tw(TAL)
Parameter
TAiIN Input Cycle Time
TAiIN Input HIGH Pulse Width
TAiIN Input LOW Pulse Width
Standard
Unit
Min.
Max.
200
ns
100
ns
100
ns
Table 5.16 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol
tw(TAH)
tw(TAL)
Parameter
TAiIN Input HIGH Pulse Width
TAiIN Input LOW Pulse Width
Standard
Unit
Min.
Max.
100
ns
100
ns
Table 5.17 Timer A Input (Counter Increment/Decrement Input in Event Counter Mode)
Symbol
tc(UP)
tw(UPH)
tw(UPL)
tsu(UP-TIN)
th(TIN-UP)
Parameter
TAiOUT Input Cycle Time
TAiOUT Input HIGH Pulse Width
TAiOUT Input LOW Pulse Width
TAiOUT Input Setup Time
TAiOUT Input Hold Time
Standard
Unit
Min.
Max.
2000
ns
1000
ns
1000
ns
400
ns
400
ns
Table 5.18 Timer A Input (Two-phase Pulse Input in Event Counter Mode)
Symbol
tc(TA)
tsu(TAIN-TAOUT)
tsu(TAOUT-TAIN)
TAiIN Input Cycle Time
TAiOUT Input Setup Time
TAiIN Input Setup Time
Parameter
Standard
Unit
Min.
Max.
800
ns
200
ns
200
ns
Rev.1.22 Mar 30, 2007 Page 32 of 53
REJ03B0088-0122