M16C30P Datasheet, PDF (24/57 Pages) Renesas Technology Corp – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER

M16C/30P Group
5. Electrical Characteristics
Table 5.2 Recommended Operating Conditions ⁽¹⁾
Symbol
VCC
AVCC
VSS
AVSS
VIH
VIL
IOH(peak)
IOH(avg)
IOL(peak)
IOL(avg)
f(XIN)
f(XCIN)
f(BCLK)
Parameter
Supply Voltage (VCC1=VCC2)
Analog Supply Voltage
Supply Voltage
Analog Supply Voltage
HIGH Input
Voltage
P3_1 to P3_7, P4_0 to P4_7, P5_0 to P5_7
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
(during single-chip mode)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
(data input during memory expansion and microprocessor mode)
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7, XIN, RESET, CNVSS, BYTE
P7_0, P7_1
LOW Input
Voltage
P3_1 to P3_7, P4_0 to P4_7, P5_0 to P5_7
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
(during single-chip mode)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
(data input during memory expansion and microprocessor mode)
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_0 to P9_7,
XIN, RESET, CNVSS, BYTE
HIGH Peak
Output Current
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
HIGH Average
Output Current
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
LOW Peak
Output Current
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
LOW Average
Output Current
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
Main Clock Input VCC=3.0V to 5.5V
Oscillation
Frequency ⁽⁴⁾
VCC=2.7V to 3.0V
Sub-Clock Oscillation Frequency
CPU Operation Clock
Min.
2.7
0.8VCC
0.8VCC
0.5VCC
0.8VCC
0.8VCC
0
0
0
0
0
0
0
Standard
Typ.
5.0
VCC
0
0
Max.
5.5
VCC
VCC
VCC
VCC
6.5
0.2VCC
0.2VCC
0.16VCC
0.2VCC
−10.0
−5.0
10.0
5.0
16
20×VCC1−44
32.768
50
16
Unit
V
V
V
V
V
V
V
V
V
V
V
V
V
mA
mA
mA
mA
MHz
MHz
kHz
MHz
NOTES:
1. Referenced to VCC1 = VCC2 = 2.7 to 5.5V at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified.
2. The Average Output Current is the mean value within 100ms.
3. The total IOL(peak) for ports P0, P1, P2, P8_6, P8_7, P9 and P10 must be 80mA max. The total IOL(peak) for ports P3, P4, P5,
P6, P7 and P8_0 to P8_4 must be 80mA max. The total IOH(peak) for ports P0, P1, and P2 must be −40mA max. The total
IOH(peak) for ports P3, P4 and P5 must be −40mA max. The total IOH(peak) for ports P6, P7, and P8_0 to P8_4 must be −40mA
max.
The total IOH(peak) for ports P8_6, P8_7 and P9 must be −40mA max. Set Average Output Current to 1/2 of peak.
4. Relationship between main clock oscillation frequency, and supply voltage.
Main clock input oscillation frequency
20 x VCC1-44MHz
16.0
10.0
0.0
Rev.1.22 Mar 30, 2007 Page 24 of 53
REJ03B0088-0122
2.7
3.0
5.5
VCC1[V] (main clock: no division)