UPD70F3740GC-UEU-AX Datasheet, PDF (291/889 Pages) Renesas Technology Corp – RENESAS MCU

V850ES/JG3
CHAPTRER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
(1) Selector operation control register 0 (SELCNT0)
The SELCNT0 register is an 8-bit register that selects the capture trigger for TMP1.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
After reset: 00H R/W Address: FFFFF308H
<>
<>
SELCNT0
0
0
0
ISEL4 ISEL3
0
0
0
ISEL4
0
1
Selection of TIP11 input signal (TMP1)
TIP11 pin input
RXDA1 pin input
ISEL3
0
1
Selection of TIP10 input signal (TMP1)
TIP10 pin input
RXDA0 pin input
Cautions 1. When setting the ISEL3 or ISEL4 bit to “1”, be sure to set the
corresponding alternate-function pins to the capture trigger input.
2. Be sure to clear bits 7 to 5, and 2 to 0 to “0”.
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
Page 275 of 870