7721 Datasheet, PDF (268/577 Pages) List of Unclassifed Manufacturers – H Bridge Power Module

A-D CONVERTER
12.6 Repeat mode
12.6 Repeat mode
In the repeat mode, the operation for the input voltage from the one selected analog input pin is performed
repeatedly.
In this mode, no A-D conversion interrupt request occurs. Additionally, the A-D conversion start bit (bit 6 at
address 1E16) remains set to “1” until it is cleared to “0” by software, and the operation is performed
repeatedly while the A-D conversion start bit is “1.”
12.6.1 Settings for repeat mode
Figure 12.6.1 shows an initial setting example for registers relevant to the repeat mode.
7721 Group User’s Manual
12–17