M306V5ME-XXXSP Datasheet, PDF (248/263 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
5.4 A-D Conversion Characteristics
Table 5.4.1 A-D conversion characteristics (referenced to VCC = AVCC = 5V, VSS = AVSS = 0 V at Ta
= 25 ^oC, f(XIN) = 10 MHz unless otherwise specified)
Symbol
Parameter
Measuring condition
—
—
RLADDER
tCONV
tSAMP
VREF
VIA
Resolution
Absolute Sample & hold function not available
accuracy _{Sample & hold function available (8 bit)}
Ladder resistance
Conversion time
Sampling time
Reference voltage
Analog input voltage
VREF = VCC
VREF = VCC = 5 V
VREF = VCC = 5 V
VREF = VCC
Standard
Min. Typ. Max.
8
±5
±5
10
40
2.8
0.3
VCC
0
VCC
Unit
Bits
LSB
LSB
kΩ
µs
µs
V
V
5.5 D-A Conversion Characteristics
Table 5.5.1 D-A conversion characteristics (referenced to VCC = 5V, VSS = AVSS = 0V at Ta = 25 ^oC,
f(XIN) = 10 MHz unless otherwise specified)
Symbol
—
—
tsu
RO
IVREF
Parameter
Resolution
Absolute accuracy
Setup time
Output resistance
Reference power supply input current
Measuring condition
(Note)
Standard
Min. Typ. Max.
8
10
3
4 10 20
1.5
Unit
Bits
%
µs
kΩ
mA
Note: This applies when using one D-A converter, with the D-A register for the unused D-A converter set to “0016.”
The A-D converter’s ladder resistance is not included.
Also, when the Vref is unconnected at the A-D control register, IVREF is sent.
5.6 Analog R, G, B Output Characteristics
Table 5.6.1 Analog R, G, B output characteristics (VCC = 5V, VSS = 0V at Ta = 25 ^oC, f(XIN) = 10 MHz
unless otherwise specified)
Symbol
RO
VOE
TST
Parameter
Output impedance
Output deviation
Settling time
Test conditions
load capacity of 10 pF,
load resistance of 20 k Ω,
70 % DC level
Standard
Min. Max.
2
±0.5
50
Unit
kΩ
V
ns
Rev. 1.0
247