M306V5ME-XXXSP Datasheet, PDF (246/263 Pages) Mitsubishi Electric Semiconductor – SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER

MITSUBISHI MICROCOMPUTERS
M306V5ME-XXXSP
M306V5EESP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
5.2 Recommended Operating Conditions
Table 5.2.1 Recommended operating conditions (referenced to VCC = 4.5 V to 5.5 V at Ta = – 10 ^oC
to 70 ^oC unless otherwise specified)
Symbol
Parameter
Vcc
AVcc
Vss
VIH
VIL
Supply voltage (Note 3)
Analog supply voltage (Note 3)
Supply voltage
HIGH input voltage
P00 to P07, P20 to P27, P30 to P37, P40 to P43,
P50, P52, P53, P55, P62, P63, P67,
P70, P71, P72, P74, P76, P82,
P90, P93, P94, P100, P101,
XIN, OSC1, RESET, CNVSS
LOW input voltage
P00 to P07, P20 to P27, P30 to P37, P40 to P43,
P50, P52, P53, P55, P62, P63, P67,
P70, P71, P72, P74, P76, P82,
P90, P93, P94, P100, P101,
XIN, OSC1, RESET, CNVSS
Standard
Min Typ. Max.
4.5
5.0
5.5
Vcc
0
0.8Vcc
Vcc
0
0.2Vcc
IOH (peak)
HIGH peak output
current
P00 to P07, P20 to P27, P30 to P37, P40 to P43,
P50, P52, P53, P55, P62, P63, P67, P72, P74, P76,
P82, P90, P93, P94, P100, P101, R, G, B, OUT1, OUT2
–10.0
IOH (avg)
HIGH average output P00 to P07, P20 to P27, P30 to P37, P40 to P43,
current
P50, P52, P53, P55, P62, P63, P67, P72, P74, P76,
P82, P90, P93, P94, P100, P101, R, G, B, OUT1, OUT2
–5.0
IOL (peak)
LOW peak output
current
P00 to P07, P20 to P27, P30 to P37, P40 to P43,
P50, P52, P53, P55, P62, P63, P67,
P70, P71, P72, P74, P76,
P82, P90, P93, P94, P100, P101, R, G, B, OUT1, OUT2
10.0
IOL (avg)
LOW average output P00 to P07, P20 to P27, P30 to P37, P40 to P43,
5.0
current
P50, P52, P53, P55, P62, P63, P74, P76,
P82, P90, P100, P101, R, G, B, OUT1, OUT2
Unit
V
V
V
V
V
mA
mA
mA
mA
IOL (avg)
f (XIN)
LOW average output P67, P70 to P72, P93, P94
current
Main clock input oscillation frequency
6.0
mA
10
MHz
fOSC
f CVIN
VI
Oscillation frequency (for OSD) OSC1 ^{LC oscillating mode}
11.0
Ceramic oscillating mode 15.0
27.0
MHz
27.0
Input frequency
Horizontal sync. signal of video signal 15.262 15.743 16.206 kHz
Input amplitude video signal CVIN
1.5
2.0
2.5
V
Notes 1: The mean output current is the mean value within 100 ms.
2: The total IOL (peak) for ports P0, P2, P9, and P10 must be 80 mA max. The total IOH (peak) for ports P0, P2, P9,
and P10 must be 80 mA max. The total IOL (peak) for ports P3, P4, P5, P6, P7 and P82 must be 80 mA max.
The total IOH (peak) for ports P3, P4, P5, P6, P72, P74, P76, and P82 must be 80 mA max.
3: Connect 0.1 µF or more capacitor externally between the power source pins VCC–VSS and AVCC–VSS so as to
reduce power source noise. Also connect 0.1 µF or more capacitor externally between the power source pins
VCC–CNVSS.
Rev. 1.01
245