HD404374 Datasheet, PDF (2/161 Pages) Renesas Technology Corp – Low-Voltage AS Microcomputers with On-Chip A/D Converter

HD404374/HD404384/HD404389/HD404082/HD404084 Series
• On-chip oscillators
 HD404374 Series
• Main clock (ceramic resonator, crystal resonator, CR oscillation* or external clock operation
possible)
• Sub-clock (32.768 kHz crystal resonator)
 HD404384, HD404389, HD404082, and HD404084 Series
• Main clock (ceramic resonator, crystal resonator, CR oscillation* or external clock operation
possible)
Note: * CR oscillation in an optional function.
• Interrupts
External: 2 (including one edge-programmable)
Internal : 5 (HD404374/HD404384/HD404389 Series)
: 4 (HD404082/HD404084 Series)
• Subroutine stack up to 16 levels, including interrupts
• Low-power dissipation modes
 HD404374 Series: 4
 HD404384, HD404389, HD404082, and HD404084 Series: 2
• Module standby (timers, serial interface, A/D converter)
• System clock division software switching (1/4 or 1/32)
• Inputs for return from stop mode (wakeup): 1
• Instruction execution time
Min. 0.89 µs (f_OSC = 4.5 MHz, division by 1/4)
Min. 0.47 µs (f_OSC = 8.5 MHz, division by 1/4)
• Operation voltage
1.8 V to 5.5 V
2.0 V to 5.5 V (ZTAT^TM)
Cautions about operation!
• Electrical properties presented on the data sheet for the mask ROM and ZTAT^TM versions will surely
and sufficiently satisfy the standard values. However, real capabilities, operation margin, noise margin,
and other properties may vary depending on differences of manufacturing processes, internal wiring
patterns, etc. Therefore, it is requested for users to carry out an evaluation test for each product on an
actual system under the same conditions to see its operation.
• After power supply has been connected, the values for the memory register, data and stack areas will be
undefined. Initialize prior to use.
Rev.5.00, Sep.11.2003, page 2 of 161