RX24T Datasheet, PDF (111/133 Pages) Renesas Technology Corp – 32-bit RXv2 CPU core

RX24T Group
5. Electrical Characteristics
FFFh
Full-scale error
A/D converter
output code
Integral nonlinearity
error (INL)
Actual A/D conversion
characteristic
Ideal line of actual A/D
conversion characteristic
Ideal A/D conversion
characteristic
Differential nonlinearity error (DNL)
1-LSB width for ideal A/D
conversion characteristic
Differential nonlinearity error (DNL)
1-LSB width for ideal A/D
conversion characteristic
Absolute accuracy
000h
0
Offset error
Analog input voltage
Figure 5.53 Illustration of A/D Converter Characteristic Terms
AVCCn (n = 0 to 2)
(full-scale)
Absolute accuracy
Absolute accuracy is the difference between output code based on the theoretical A/D conversion characteristics, and the
actual A/D conversion result. When measuring absolute accuracy, the voltage at the midpoint of the width of analog
input voltage (1-LSB width), that can meet the expectation of outputting an equal code based on the theoretical A/D
conversion characteristics, is used as an analog input voltage. For example, if 12-bit resolution is used and if reference
voltage (AVCCn (n = 0 to 2)) is 3.072 V, then 1-LSB width becomes 0.75 mV, and 0 mV, 0.75 mV, 1.5 mV, ... are used as
analog input voltages.
If analog input voltage is 6 mV, absolute accuracy = ±5 LSB means that the actual A/D conversion result is in the range
of 003h to 00Dh though an output code, 008h, can be expected from the theoretical A/D conversion characteristics.
Integral nonlinearity error (INL)
Integral nonlinearity error is the maximum deviation between the ideal line when the measured offset and full-scale
errors are zeroed, and the actual output code.
R01DS0257EJ0200 Rev.2.00
Apr 14, 2017
Page 111 of 133