AR0135CS Datasheet, PDF (2/27 Pages) ON Semiconductor – 1/3‐inch 1.2 Mp CMOS Digital Image Sensor

AR0135CS
ORDERING INFORMATION
Table 2. ORDERABLE PART NUMBERS
Part Number
Description
AR0135CS2M00SUD20
Mono, 0° CRA, Bare Die
AR0135CS2M00SUEA0−DPBR Mono, 0° CRA, IBGA
AR0135CS2M00SUEA0−DPBR1 Mono, 0° CRA, IBGA
AR0135CS2M00SUEA0−DRBR
AR0135CS2M00SUEA0−DRBR1
Mono, 0° CRA, IBGA
Mono, 0° CRA, IBGA
AR0135CS2M00SUEA0−TPBR
AR0135CS2M00SUEA0−TRBR
AR0135CS2M00SUEAH3−GEVB
AR0135CS2M25SUD20
AR0135CS2M25SUEA0−DPBR
AR0135CS2M25SUEA0−DPBR1
Mono, 0° CRA, IBGA
Mono, 0° CRA, IBGA
Mono, 0° CRA, Head Board
Mono, 25° CRA, Die
Mono, 25° CRA, IBGA
Mono, 25° CRA, IBGA
AR0135CS2M25SUEA0−DRBR
AR0135CS2M25SUEA0−DRBR1
Mono, 25° CRA, IBGA
Mono, 25° CRA, IBGA
AR0135CS2M25SUEA0−TPBR
AR0135CS2M25SUEA0−TRBR
AR0135CS2M25SUEAH3−GEVB
AR0135CS2C00SUD20
AR0135CS2C00SUEA0−DPBR
AR0135CS2C00SUEA0−DPBR1
Mono, 25° CRA, IBGA
Mono, 25° CRA, IBGA
Mono, 25° CRA, Head Board
Color, 0° CRA, Die
Color, 0° CRA, IBGA
Color, 0° CRA, IBGA
AR0135CS2C00SUEA0−DRBR
AR0135CS2C00SUEA0−DRBR1
Color, 0° CRA, IBGA
Color, 0° CRA, IBGA
AR0135CS2C00SUEA0−TPBR
AR0135CS2C00SUEA0−TRBR
Color, 0° CRA, IBGA
Color, 0° CRA, IBGA
AR0135CS2C00SUEAH3−GEVB Color, 0° CRA, Head Board
Orderable Product Attribute Description
Dry Pack with Protective Film, Double Side BBAR Glass
Dry Pack with Protective Film, Double Side BBAR Glass,
MPQ = 260
Dry Pack without Protective Film, Double Side BBAR Glass
Dry Pack without Protective Film, Double Side BBAR Glass,
MPQ = 260
Tape & Reel with Protective Film, Double Side BBAR Glass
Tape & Reel without Protective Film, Double Side BBAR Glass
Dry Pack with Protective Film, Double Side BBAR Glass
Dry Pack with Protective Film, Double Side BBAR Glass,
MPQ = 260
Dry Pack without Protective Film, Double Side BBAR Glass
Dry Pack without Protective Film, Double Side BBAR Glass,
MPQ = 260
Tape & Reel with Protective Film, Double Side BBAR Glass
Tape & Reel without Protective Film, Double Side BBAR Glass
Dry Pack with Protective Film, Double Side BBAR Glass
Dry Pack with Protective Film, Double Side BBAR Glass,
MPQ = 260
Dry Pack without Protective Film, Double Side BBAR Glass
Dry Pack without Protective Film, Double Side BBAR Glass,
MPQ = 260
Tape and Reel with Protective Film, Double Side BBAR Glass
Tape and Reel without Protective Film, Double Side BBAR
Glass
GENERAL DESCRIPTION
The AR0135CS from ON Semiconductor can be operated
in its default mode or programmed for frame size, exposure,
gain, and other parameters. The default mode output is
a full-resolution image at 54 frames per second (fps). It
outputs 12-bit raw data, using either the parallel or serial
(HiSPi) output ports. The device may be operated in video
(master) mode or in frame trigger mode.
FRAME_VALID and LINE_VALID signals are output on
dedicated pins, along with a synchronized pixel clock.
A dedicated FLASH pin can be programmed to control
external LED or flash exposure illumination.
The AR0135CS includes additional features to allow
application-specific tuning: windowing, adjustable auto-
exposure control, auto black level correction, on-board
temperature sensor, and row skip and digital binning modes.
The sensor is designed to operate in a wide temperature
range (–30°C to +80°C).
www.onsemi.com
2