E32DC200E Datasheet, PDF (48/56 Pages) Omron Electronics LLC – 530 Watts ECL Series

Application-corresponding Fiber Units
Models for Glass-substrate Alignment/Mapping
Indicates models that allow free cutting.
E32-A08
E32-A07E1(E2)
24.5
3.8 10.7 6.5
2,000
Reception fiber: 2.2 dia.
E32-L66
21.7
1
11
7
A
2,000
B
25
5
13 *2
14 12
18
2.2 dia.
1.1
Optical axis
Two, 3.2-dia. mounting holes
with four, 6-dia. countersinks _{Emission fiber: 2.2 dia.}
5
* The E32-A07E1(E2) has a reception fiber and an
emission fiber. Use the fiber with a model display tube
(fiber with blue dotted line) as light emitting side.
E32-A09
E32-A09H
9
Optical axis
23
2,000
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
Sensing head *1
4 dia.
*1. Material: Stainless steel (SUS303)
5.5
36
Two, 2.8-dia. flexible tubes (stainless steel)
Note: The maximum allowable temperatures for sections A and B are
300°C and 110°C, respectively. The section inserted into the Am-
plifier Unit (indicated by *2), however, must stay within the Ampli-
fier Unit's operating temperature range.
E32-A09H2
A
B
Optical
axis 9
30
12 7
2,000
5
Two, 3.24-dia. mounting holes
with four, 6-dia. countersinks
28
13 *2
Lens:
5.8 dia.
8.9 20
12 7
Sensing head*
Optical fiber: Two, 2.2 dia.
8.9 24
2.8-dia. flexible tubes*
2.2 dia.
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
*Material: Aluminum
Lens: 5.8 dia.
Sensing head *1
5 dia. 4 dia.
*1. Material: Stainless steel
Note: The maximum allowable temperatures for sections A and B
are 300°C and 110°C, respectively. The section inserted into
the Amplifier Unit (indicated by *2), however, must stay within
the Amplifier Unit's operating temperature range.
Wafer-mapping Models
E32-A03
0.4
Two, R1.6
20.5
1.8
2,000
25
4.3 17.6 11
3 dia.
3.4
R1.6
2
3.2 _{Stamp (1-mm dia.)}
10
Sensing head *1
3.2
E39-L83 Mounting Bracket (SUS)
10
Fiber Attachment (E39-F9)
*Material: Brass/nickel plating
2 dia. Sensing surface
Note: Use the stamped surface and its opposing surface as installation (refer-
ence) surfaces.
E32-A04
E32-A03-1
3 dia.
24.5
18.5
2,000
Optical fiber: 1 dia.
25
10
4.5
10
3.5
Stamp (1-mm dia.)
3
6.5 3 ^{Two, 3.4 dia.}
12.5
Fiber Attachment (E39-F9)
Sensing
13
surface
2 dia.
Sensing head *
*Material: Brass/nickel plating
Note 1. Use the stamped surface and its opposing surface as installation (ref-
erence) surfaces.
2. Set of two symmetrical parts.
E32-A04-1
Four, R1.35
20.5
4 _Stamp
(1-mm dia.)
2,000
25
10
Optical fiber: 1 dia.
2 dia.
2
2
2 dia.
Sensing head *
2 1.2 dia.
Stamp (1-mm dia.)
Fiber Attachment
(E39-F9)
*Material: Stainless steel (SUS303)
Sensing surface
Note: Use the stamped surface and its opposing surface as installation (refer-
ence) surfaces.
2
Installation
(reference)
surface
21
2
4
2 dia.
2,000
25
Optical fiber: 1 dia. ¹⁰
9 _2.5
1.2
Optical
axis
3.5 10 ^{Two, M2}
17
1.2 dia.
Fiber Attachment (E39-F9)
Sensing surface
2
Sensing head * ^{*Material: Stainless steel (SUS303)}
Note: Set of two symmetrical parts.
48