E32DC200E Datasheet, PDF (39/56 Pages) Omron Electronics LLC – 530 Watts ECL Series

Through-beam Fiber Units
Fine-beam (narrow vision field) Models
E32-T22S
1.7 dia.
3 dia.
Sensing head*
Optical fiber: 2.2 dia.
15
2,000
*Material: Brass/nickel plating
Area-sensing Models
E32-T16W
E32-T16WR
5
Sensing
surface
(3 × 30)
23
18
12
18.5
Optical axis
65
45
69
E32-T24S
0.4
1.8
17.6 3.5 dia.
11 _3.2
Sensing head* Optical fiber: 2.2 dia.
3
3.2
Mounting bracket (provided as accessory)
10
20.5
2,000
2 dia.
Sensing surface
2
*Material: Brass/nickel plating
E32-M21
Two hexagonal nuts
Sensing head: Two toothed washers
M3 × 0.35 *2
Silicon tube *1
Four, 1-dia.
plastic fibers
*1. One set of silicon tubes is
black and the other set is gray.
Use this difference to
distinguish between the
emission and reception sides.
*2. Material: Stainless steel
(SUS303)
Sleeve
E32-T16P
E32-T16PR
Sensing head*
Optical fiber:
2.2 dia.
Two, 3.2-dia. mounting holes
with 6-dia. countersinks
2,000
*Material: ABS (sensing surface: PMMA)
E32-T16J
E32-T16JR
1.8
11
23
2,000
E32-T16
13
28
Two, 3.2 dia.
14.5
6-dia.
countersink
10.7
19
4
4
Optical
axis
27
20
Sensing
surface
(2 × 11)
Sensing head*1
2,000
Receiver
Emitter
14.5
10.7
Sensing surface (2 × 11)
Sensing
3.3 _surface
2
(2 × 11)
4
Optical
axis
19
27
Lens* ²⁰
4
Two, 3.2-dia.
holes with 6-dia.
countersinks
Sensing
head*
Optical fiber:
2.2 dia.
2000
27 ²⁵
15.5
8.85 3
8.4
Sensing head*1
Optical
axis
20
6 dia.
2,000
Sensing
surface
(2 × 10)
(PMMA)
Optical fiber: 2.2 dia.
*1. Material: Heat-resistant ABS
(sensing surface: PMMA)
*2. Provided with stickers with
slits of width 0.5 and 1 mm (2 of each).
*Material: ABS for the sensing head
and PMMA for the lens.
Optical fiber: 2.2 dia.
*1. Material: Heat-resistant ABS
(sensing surface: PMMA)
*2. Provided with stickers with slits
of width 0.5 and 1 mm (2 of each).
Heat-resistant Models
E32-T51
1.5 dia.
Two hexagonal nuts
Two toothed washers
Sensing head: M4 × 0.7* _{Optical fiber: 2.2 dia.}
2.85 dia.
7
2.4
1
15
17
2,000
*Material: Brass/nickel plating
Note: The maximum allowable temperature is 150°C. The maximum al-
lowable temperature for continuous operation is 130°C.
E32-T54
1
Sensing surface
2.5
Sensing head: 3 dia.*
Optical fiber: 2.2 dia.
2 dia.
1.7
45°
25
20
45
2,000
*Material: Stainless steel (SUS303)
Note: The maximum allowable temperature is 150°C. The maximum
allowable temperature for continuous operation is 130°C.
39