E32DC200E Datasheet, PDF (46/56 Pages) Omron Electronics LLC – 530 Watts ECL Series

Fiber Units with Reflective Sensors
Convergent-reflective Models
E32-L86
Optical axis
Two, 4 dia.
33.5
19 11
7
8.9 18
27
A
2,000
5 (max.)
B
25
13 *2
4 dia.
Two, 3.2-dia. holes with 6-dia. countersinks on one side
Indicates models that allow free cutting.
Note: The maximum allowable temperatures
for sections A and B are 200“C and
110“C, respectively. The section insert-
ed into the Amplifier Unit (indicated by
*2), however, must stay within the Am-
plifier Unit's operating temperature
range.
5.5
Sensing head (stainless steel) ^{Flexible tube: 2.8 dia.*1}
*1 Material: Stainless steel
Heat-resistant Models
E32-D51
Two, 1.5 dia.
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75*
Optical fiber: Two, 2.2 dia.
4.9
3.1
10
2.4
3 13
17
2,000
*Material: Brass/nickel plating
Note: The maximum allowable temperature is 150“C. The maximum
allowable temperature for continuous operation is 130“C.
E32-D81R-S
E32-D81R
Fiber: 1.2 dia.
M4 × 0.7
Using the E32-D81R-S
Two toothed washers (SUS)
Two hexagonal nuts (SUS)
Sensing head: M6 × 0.75 *1 SUS flexible tube
Protective tube (gray)
(4.2 dia.)
5 dia.
2.2 dia. Sleeve
Using the E32-D81R
5 dia.
SUS303 2.2 dia.
Sleeve
32
20
(70)
5
A
2,000
5
11.5
10 *2
15
B
4.5 8.5
8 15
3
5
5
6.5
16.5
13 *2
6.4
B
*1. Material: Stainless steel (SUS303)
Note 1. The maximum allowable tempera-
tures for sections A and B are 200“C
and 110“C, respectively. The section
inserted into the Amplifier Unit (indi-
cated by *2), however, must stay
within the Amplifier Unit's operating
temperature range.
2. Confirm applicable Amplifier Units
before placing an order. (Refer to
Precautions for Correct Use.)
E32-D61-S
E32-D61
1.4 dia. M4 × 0.7
Using the E32-D61-S
Two hexagonal nuts
Two toothed washers
Sensing head: M6 × 0.75 *1
5 dia. *3 3.5 dia.
SUS flexible tube
5 dia.
2.2 dia. Sleeve
Using the E32-D61
Hexagonal
SUS316L _Sleeve
caulking 5 dia.
4.5 8.5
8 15
10
3
2
3
20 ^2.4
5 *4
A
2,000
5
11.5 _{10 *2}
5
15
B
E32-D73-S
E32-D73
1 dia.
Stainless-steel tube:
1.25 dia.
1.65 dia. 2.5 dia.
Using the E32-D73-S
Two hexagonal nuts
Two toothed washers SUS flexible tube
Sensing head: M4 × 0.7 *1
4 dia.
2.8 dia.
5 dia.
2.2 dia. Sleeve
5
6.5
*2
6.4
16.5
13
B
*1. Material: Stainless steel (SUS303)
*3. The diameter is 6 if the fiber length exceeds 10 m.
*4. The diameter is 10 if the fiber length exceeds 10 m.
Using the E32-D73
Hexagonal caulking ^SUS316L Sleeve
5 dia.
4.5 8.5
7
5
5
2.4
5
11.5 _{10 *2}
5
60
20
10
2,000
15
A
B
C
5
6.5
*2
6.4
16.5
13
C
*1. Material: Stainless steel (SUS303)
Note 1. The maximum allowable tempera-
tures for sections A and B are 350“C
and 110“C, respectively. The section
inserted into the Amplifier Unit (indi-
cated by *2), however, must stay
within the Amplifier Unit's operating
temperature range.
2. Confirm applicable Amplifier Units
before placing an order. (Refer to
Precautions for Correct Use.)
Note 1. The maximum allowable tempera-
tures for sections A, B, and C are
400“C, 300“C, and 110“C, respec-
tively. The section inserted into the
Amplifier Unit (indicated by *2), how-
8 15
ever, must stay within the Amplifier
Unit's operating temperature range.
2. Confirm applicable Amplifier Units
before placing an order. (Refer to
Precautions for Correct Use.)
Chemical-resistant Models
E32-D12F
Sensing head: 6 dia. Fluororesin
5 dia.
E32-D14F
Optical fiber: Two, 2.2 dia.
(26)
4.5
2,000
100
Fluororesin tube
(protective cover)
16
2,000
Optical ^{Sensing head: 7 dia.}
Optical fiber: 2.2 dia.
100
axis
Optical-axis mark
46