COP840CJ Datasheet, PDF (29/36 Pages) National Semiconductor (TI) – 8-Bit Microcontrollers with Multi-Input Wake-Up and Brown Out Detector

Mask Option
The mask programmable options are listed below. The op-
tions are programmed at the same time as the ROM pat-
tern to provide the user with hardware flexibility to use a
variety of oscillator configurations and the Brown Out fea-
ture.
The following option information is to be sent to National
along with the EPROM. Contact the sales office for more
details.
OPTION 1: CKI INPUT
= 1 Crystal (CKI/10) G7/CKO for crystal
configuration
= 2 External (CKI/10) G7 available as
input
= 3 R/C (CKI/10) G7 available as input
OPTION 2: ″Brown Out″
= 1 Enable Brown Out Detection
= 2 Disable Brown Out Detection
OPTION 3: BONDING
= 1 28-Pin DIP/SO Package
= 2 20-Pin DIP/SO Package
How to Order
To order a complete development package, select the
section for the microcontroller to be developed and order
the parts listed. Contact the sales office for more details.
Development Support
SUMMARY
• iceMASTER™: IM-COP8/400 — Full feature in-circuit
emulation for all COP8 products. A full set of COP8 Basic
and Feature Family device and package specific probes
are available.
• COP8 Debug Module: Moderate cost in-circuit emulation
and development programming unit.
• COP8 Evaluation and Programming Unit:
EPU-COP880C — low cost In-circuit simulation and de-
velopment programming unit.
• Assembler: COP8-DEV-IBMA. A DOS installable cross
development Assembler, Linker, Librarian and Utility Soft-
ware Development Tool Kit.
• C Compiler: COP8C. A DOS installable cross develop-
ment Software Tool Kit.
• OTP/EPROM Programmer Support: Covering needs
from engineering prototype, pilot production to full pro-
duction environments.
29
www.national.com