English
Language : 

MT40A512M16JY-083E Datasheet, PDF (330/358 Pages) Micron Technology – Automotive DDR4 SDRAM
8Gb: x8, x16 Automotive DDR4 SDRAM
Speed Bin Tables
Table 153: DDR4-2666 Speed Bins and Operating Conditions (Continued)
DDR4-2666 Speed Bin
CL-nRCD-nRP
Parameter
CL = 20 CL = 23
CWL = 14, 18
Supported CL settings
Supported CL settings with read DBI
Supported CWL settings
Symbol
tCK4
-075F
17-17-17
Min
Max
0.750 <0.833
9–20
11–16, 18–23
9-12, 14, 16, 18
-075E
18-18-18
Min
Max
0.750 <0.833
9–20
11–16, 18–23
9-12, 14, 16, 18
-075
19-19-19
Min
Max
0.750 <0.833
10-–20
12–16, 18–23
9-12, 14, 16, 18
Unit
ns
nCK
nCK
nCK
Notes:
1. Speed Bin table is only valid with DLL enabled and gear-down mode disabled.
2. When operating in 2tCK WRITE preamble mode, CWL must be programmed to a value
at least 1 clock greater than the lowest CWL setting supported in the applicable tCK
range.
3. The programmed value of CWL must be less than or equal to programmed value of CL.
4. tCK (AVG) MIN.
5. The DRAM supports 13.92ns with CL13 operation, 14.07ns with CL15 operation, and
14.16ns with CL17 operation at defined clock rates.
6. If the clock period is less than 0.938ns and greater than or equal to 0.937ns, timing pa-
rameters that are derived off the clock will use 0.938ns as its reference. For example, if
tCK (MIN) = 0.938ns and tRP = 14.06ns, then tRP would require 15nCKs (14.06ns/0.938ns),
but if tCK (MIN) = 0.937ns and tRP = 14.06ns, then tRP would still require 15nCKs
(14.06ns/0.938ns) and not 16nCKs (14.06ns/0.937ns).
7. When calculating tRC and tRP in clocks, values may not be used in a combination that
would violate tRAS.
Table 154: DDR4-2933 Speed Bins and Operating Conditions
DDR4-2933 Speed Bin
CL-nRCD-nRP
Parameter
Internal READ command to first data
Internal READ command to first data
with read DBI enabled
Symbol
tAA
tAA_DBI
ACTIVATE to internal READ or WRITE
delay time
PRECHARGE command period
ACTIVATE-to-PRECHARGE command
period
ACTIVATE-to-ACTIVATE or REFRESH
command period
READ: READ: DBI WRITE
nonDBI
CL = 9 CL = 11
CWL = 9
CL = 10 CL = 12
CWL = 9
CL = 10 CL = 12
CWL = 9, 11
tRCD
tRP
tRAS
tRC6
Symbol
tCK4
tCK4
tCK4
-068E
20-20-20
Min
Max
13.645 19.00
tAA
(MIN) +
4nCK
tAA
(MAX) +
4nCK
13.64
–
13.64
32
–
9 × tREFI
tRAS +
tRP
Min
–
Max
1.5
1.9
1.5
1.9
Reserved
-068
21-21-21
Min
Max
14.32
19.00
tAA
(MIN) +
4nCK
tAA
(MAX) +
4nCK
14.32
–
14.32
32
–
9 × tREFI
tRAS +
tRP
Min
–
Max
Reserved
1.5
1.9
Reserved
-068D
22-22-22
Min
Max
15
19.00
tAA
(MIN) +
4nCK
tAA
(MAX) +
4nCK
15
–
Unit
ns
ns
ns
15
–
ns
32
9 × tREFI ns
tRAS +
tRP
Min
–
ns
Max Unit
Reserved
ns
1.5
1.9
ns
Reserved
ns
CCMTD-1406124318-10419
8gb_auto_ddr4_dram.pdf - Rev. C 3/17 EN
330
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.