PIC24FJ256GB108-I Datasheet, PDF (94/352 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
REGISTER 7-14: IEC3: INTERRUPT ENABLE CONTROL REGISTER 3
U-0
R/W-0
U-0
U-0
U-0
U-0
U-0
—
RTCIE
—
—
—
—
—
bit 15
U-0
—
bit 8
U-0
R/W-0
R/W-0
U-0
—
INT4IE⁽¹⁾
INT3IE⁽¹⁾
—
bit 7
U-0
R/W-0
R/W-0
U-0
—
MI2C2IE
SI2C2IE
—
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13-7
bit 6
bit 5
bit 4-3
bit 2
bit 1
bit 0
Unimplemented: Read as ‘0’
RTCIE: Real-Time Clock/Calendar Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
Unimplemented: Read as ‘0’
INT4IE: External Interrupt 4 Enable bit⁽¹⁾
1 = Interrupt request enabled
0 = Interrupt request not enabled
INT3IE: External Interrupt 3 Enable bit⁽¹⁾
1 = Interrupt request enabled
0 = Interrupt request not enabled
Unimplemented: Read as ‘0’
MI2C2IE: Master I2C2 Event Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
SI2C2IE: Slave I2C2 Event Interrupt Enable bit
1 = Interrupt request enabled
0 = Interrupt request not enabled
Unimplemented: Read as ‘0’
Note 1: If an external interrupt is enabled, the interrupt input must also be configured to an available RPn or RPIn
pin. See Section 10.4 “Peripheral Pin Select” for more information.
DS39897C-page 94
 2009 Microchip Technology Inc.