PIC24FJ256GB108-I Datasheet, PDF (315/352 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
TABLE 29-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Idle Current (IIDLE)⁽²⁾
DC40
DC40a
DC40b
DC40d
DC40e
220
310
A
220
310
A
220
310
A
300
390
A
300
390
A
-40°C
+25°C
+85°C
-40°C
+25°C
2.0V⁽³⁾
3.3V⁽⁴⁾
1 MIPS
DC40f
300
420
A
+85°C
DC43
DC43a
0.85
1.1
mA
0.85
1.1
mA
-40°C
+25°C
2.0V⁽³⁾
DC43b
DC43d
DC43e
0.87
1.2
mA
1.1
1.4
mA
1.1
1.4
mA
+85°C
-40°C
+25°C
3.3V⁽⁴⁾
4 MIPS
DC43f
1.1
1.4
mA
+85°C
DC47
DC47a
4.4
5.6
mA
4.4
5.6
mA
-40°C
+25°C
2.5V⁽³⁾
DC47b
DC47c
DC47d
4.4
5.6
mA
4.4
5.6
mA
4.4
5.6
mA
+85°C
-40°C
+25°C
3.3V⁽⁴⁾
16 MIPS
DC47e
4.4
5.6
mA
+85°C
DC50
DC50a
1.1
1.4
mA
1.1
1.4
mA
-40°C
+25°C
2.0V⁽³⁾
DC50b
DC50d
DC50e
1.1
1.4
mA
1.4
1.8
mA
1.4
1.8
mA
+85°C
-40°C
+25°C
3.3V⁽⁴⁾
FRC (4 MIPS)
DC50f
1.4
1.8
mA
+85°C
DC51
DC51a
DC51b
DC51d
DC51e
DC51f
Note 1:
2:
3:
4:
4.3
13
A
4.5
13
A
-40°C
+25°C
2.0V⁽³⁾
10
32
A
44
77
A
44
77
A
+85°C
-40°C
+25°C
3.3V⁽⁴⁾
LPRC (31 kHz)
70
132
A
+85°C
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
Base IIDLE current is measured with the core off, OSCI driven with external square wave from rail to rail.
All I/O pins are configured as inputs and pulled to VDD. MCLR = VDD; WDT and FSCM are disabled. No
peripheral modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
On-chip voltage regulator disabled (ENVREG tied to VSS).
On-chip voltage regulator enabled (ENVREG tied to VDD). Low-Voltage Detect (LVD) and Brown-out
Detect (BOD) are enabled.
 2009 Microchip Technology Inc.
DS39897C-page 315