English
Language : 

PIC24FJ256GB108-I Datasheet, PDF (164/352 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)
PIC24FJ256GB110 FAMILY
FIGURE 12-1:
TIMER2/3 AND TIMER4/5 (32-BIT) BLOCK DIAGRAM
T2CK
(T4CK)
Gate
Sync
TON
1x
01
TCKPS<1:0>
2
Prescaler
1, 8, 64, 256
TCY
TGATE
1
Set T3IF (T5IF)
0
QD
Q CK
PR3
(PR5)
PR2
(PR4)
ADC Event Trigger(3)
Equal
Comparator
MSB
Reset
TMR3
(TMR5)
TMR2
(TMR4)
16
Read TMR2 (TMR4)(1)
Write TMR2 (TMR4)(1)
16
TMR3HLD 16
(TMR5HLD)
LSB
00
TGATE(2)
TCS(2)
Sync
Data Bus<15:0>
Note 1:
2:
3:
The 32-Bit Timer Configuration bit, T32, must be set for 32-bit timer/counter operation. All control bits are
respective to the T2CON and T4CON registers.
The timer clock input must be assigned to an available RPn pin before use. Please see Section 10.4 “Peripheral
Pin Select” for more information.
The ADC Event Trigger is available only on Timer 2/3 in 32-bit mode and Timer 3 in 16-bit mode.
DS39897C-page 164
 2009 Microchip Technology Inc.