PIC24FJ256GB108-I Datasheet, PDF (313/352 Pages) Microchip Technology – 64/80/100-Pin, 16-Bit Flash Microcontrollers with USB On-The-Go (OTG)

PIC24FJ256GB110 FAMILY
TABLE 29-3: DC CHARACTERISTICS: TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Param
No.
Symbol
Characteristic
Min
Typ⁽¹⁾ Max Units
Conditions
Operating Voltage
DC10 Supply Voltage
VDD
2.2
—
3.6
V Regulator enabled
VDD
VDDCORE
—
3.6
V Regulator disabled
VDDCORE
2.0
—
2.75
V Regulator disabled
DC12 VDR
RAM Data Retention
1.5
—
—
V
Voltage⁽²⁾
DC16 VPOR VDD Start Voltage
VSS
To Ensure Internal
Power-on Reset Signal
—
—
V
DC17 SVDD
VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.05
—
—
V/ms 0-3.3V in 0.1s
0-2.5V in 60 ms
DC18 VBOR BOR Voltage on VDD
—
Transition. High-to-Low
2.05
—
V Voltage regulator enabled
Note 1: Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: This is the limit to which VDD can be lowered without losing RAM data.
 2009 Microchip Technology Inc.
DS39897C-page 313