|
PIC16LF1904 Datasheet, PDF (3/288 Pages) Microchip Technology – 28/40/44-Pin Flash-Based, 8-Bit CMOS Microcontrollers with LCD Driver and nanoWatt XLP Technology | |||
|
◁ |
PIC16LF1904/6/7
28/40/44-Pin 8-Bit Flash Microcontrollers with nanoWatt XLP Technology
High-Performance RISC CPU:
⢠C Compiler Optimized Architecture
⢠Only 49 Instructions
⢠Up to 14 Kbytes Self-Write/Read Flash Program
Memory Addressing
⢠Up to 256 Bytes Data Memory Addressing
⢠Operating Speed:
- DC â 20 MHz clock input @ 3.6V
- DC â 16 MHz clock input @ 1.8V
- DC â 200 ns instruction cycle
⢠Interrupt Capability with Automatic Context
Saving
⢠16-Level Deep Hardware Stack with Optional
Overflow/Underflow Reset
⢠Direct, Indirect and Relative Addressing modes:
- Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
Flexible Oscillator Structure:
⢠16 MHz Internal Oscillator Block:
- Accuracy to ± 3%, typical
- Software selectable frequency range from
16 MHz to 31.25 kHz
⢠31 kHz Low-Power Internal Oscillator
⢠Three External Clock modes up to 20 MHz
⢠Two-Speed Oscillator Start-up
⢠Low-Power RTC Implementation via LPT1OSC
Special Microcontroller Features:
⢠Operating Voltage Range:
- 1.8V-3.6V
⢠Self-Programmable under Software Control
⢠Power-on Reset (POR)
⢠Power-up Timer (PWRT)
⢠Low-Power Brown-Out Reset (LPBOR)
⢠Extended Watchdog Timer (WDT)
⢠In-Circuit Serial Programming⢠(ICSPâ¢) via
Two Pins
⢠In-Circuit Debug (ICD) via Two Pins
⢠Enhanced Low-Voltage Programming (LVP)
⢠Programmable Code Protection
⢠Power-Saving Sleep mode
Extreme Low-Power Management
PIC16LF1904/6/7 with nanoWatt XLP:
⢠Sleep mode: 30 nA @ 1.8V, typical
⢠Watchdog Timer: 300 nA @ 1.8V, typical
⢠Timer1 Oscillator: 500 nA @ 1.8V, typical
Analog Features:
⢠Analog-to-Digital Converter (ADC):
- 10-bit resolution, up to 14 channels
- Conversion available during Sleep
- Dedicated ADC RC oscillator
- Fixed Voltage Reference (FVR) as channel
⢠Integrated Temperature Indicator
⢠Voltage Reference module:
- Fixed Voltage Reference (FVR) with 1.024V
and 2.048V output levels
Peripheral Highlights:
⢠Up to 36 I/O Pins and 1 Input-only Pin:
- High current 25 mA sink/source
- Individually programmable weak pull-ups
- Individually programmable interrupt-on-
change (IOC) pins
⢠Integrated LCD Controller:
- At least 19 segment pins and as many as 116
total segments
- Variable clock input
- Contrast control
- Internal voltage reference selections
⢠Timer0: 8-Bit Timer/Counter with 8-Bit
Programmable Prescaler
⢠Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Dedicated low-power 32 kHz oscillator driver
⢠Enhanced Universal Synchronous Asynchronous
Receiver Transmitter (EUSART):
- RS-232, RS-485 and LIN compatible
- Auto-Baud Detect
- Auto-wake-up on start
ï£ 2011 Microchip Technology Inc.
Preliminary
DS41569A-page 3
|
▷ |