PIC24F16KA102_11 Datasheet, PDF (224/278 Pages) Microchip Technology – 20/28-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KA102 FAMILY
TABLE 29-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Power-Down Current (IPD): PMD Bits are Set, PMSLP Bit is ‘0’⁽²⁾
DC60
0.200
-40°C
DC60a
0.200
+25°C
DC60b
0.025
0.870
A
+60°C
1.8V
DC60c
1.350
+85°C
DC60d
DC60e
10.00
0.540
+125°C
-40°C
Base Power-Down Current
(Sleep)⁽³⁾
DC60f
0.540
+25°C
DC60g
0.105
1.680
A
+60°C
3.3V
DC60h
2.450
+85°C
DC60i
11.00
+125°C
DC70
0.150
-40°C
DC70a
0.150
+25°C
DC70b
0.020
0.430
A
+60°C
1.8V
DC70c
0.630
+85°C
DC70d
DC70e
3.00
0.300
+125°C
-40°C
Base Deep Sleep Current
DC70f
0.300
+25°C
DC70g
0.035
0.700
A
+60°C
3.3V
DC70h
0.980
+85°C
DC70i
5.00
+125°C
DC61
0.65
-40°C
DC61a
0.65
+25°C
DC61b
0.55
0.65
A
+60°C
1.8V
DC61c
0.65
+85°C
DC61d
DC61e
1.20
0.95
+125°C
-40°C
Watchdog Timer Current (WDT)^(3,4)
DC61f
0.95
+25°C
DC61g
0.87
0.95
A
+60°C
3.3V
DC61h
0.95
+85°C
DC61i
1.50
+125°C
Note 1:
2:
3:
4:
5:
6:
Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as outputs and set low.
WDT, etc., are all switched off.
The  current is the additional current consumed when the module is enabled. This current should be added to
the base IPD current.
Current applies to Sleep only.
Current applies to Sleep and Deep Sleep.
Current applies to Deep Sleep only.
DS39927C-page 224
 2008-2011 Microchip Technology Inc.