PIC24F16KA102_11 Datasheet, PDF (130/278 Pages) Microchip Technology – 20/28-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP Technology

PIC24F16KA102 FAMILY
REGISTER 15-2: PADCFG1: PAD CONFIGURATION CONTROL REGISTER
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
bit 15
U-0
—
bit 8
U-0
—
bit 7
U-0
U-0
R/W-0
R/W-0
R/W-0
R/W-0
R/W-0
—
—
SMBUSDEL⁽³⁾ OC1TRIS⁽²⁾ RTSECSEL1^(1,4) RTSECSEL0^(1,4)
—
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-5
bit 3
bit 0
Unimplemented: Read as ‘0’
OC1TRIS: OC1 Output Tri-State Select bit⁽²⁾
1 = OC1 output will not be active on the pin; OCPWM1 can still be used for internal triggers
0 = OC1 output will be active on the pin based on the OCPWM1 module settings
Unimplemented: Read as ‘0’
Note 1:
2:
3:
4:
To enable the actual RTCC output, the RTCOE (RCFGCAL) bit needs to be set.
To enable the actual OC1 output, the OCPWM1 module has to be enabled.
Bit 4 is described in Section 17.0 “Inter-Integrated Circuit (I2C™)”.
Bits 2 and 1 are described in Section 19.0 Real-Time Clock and Calendar (RTCC).
DS39927C-page 130
 2008-2011 Microchip Technology Inc.