PIC24F04KA201 Datasheet, PDF (195/224 Pages) Microchip Technology – 14/20-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP™ Technology

PIC24F04KA201 FAMILY
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Power-Down Current (IPD): PMD Bits are Set, PMSLP Bit is ‘0’⁽²⁾
DC70
0.200
-40°C
DC70a
DC70b
0.045
0.200
0.200
+25°C
μA
+60°C
DC70c
0.200
+85°C
DC70d
0.200
-40°C
DC70e
DC70f
0.095
0.200
0.200
+25°C
μA
+60°C
DC70g
0.200
+85°C
DC71
0.55
-40°C
DC71a
DC71b
0.55
0.35
0.55
+25°C
μA
+60°C
1.8V
3.3V
1.8V
LPBOR^(3,4)
DC71c
DC71d
DC71e
DC71f
DC71g
DC72
0.55
+85°C
Deep Sleep Watchdog Timer:
0.75
-40°C
DSWDT (SOSC – LP)⁽⁵⁾
0.75
0.55
0.75
+25°C
μA
3.3V
+60°C
0.75
+85°C
0.200
-40°C
DC72a
DC72b
DC72c
DC72d
DC72e
DC72f
0.005
0.200
0.200
+25°C
μA
1.8V
+60°C
0.200
0.200
+85°C
-40°C
Deep Sleep BOR: DSBOR^(3,5)
0.010
0.200
0.200
+25°C
μA
3.3V
+60°C
DC72g
Note 1:
2:
3:
4:
5:
0.200
+85°C
Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled
high. WDT, etc., are all switched off.
The Δ current is the additional current consumed when the module is enabled. This current should be added to
the base IPD current.
Current applies to Sleep only.
Current applies to Deep Sleep only.
© 2009 Microchip Technology Inc.
Preliminary
DS39937B-page 193