PIC24F04KA201 Datasheet, PDF (194/224 Pages) Microchip Technology – 14/20-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP™ Technology

PIC24F04KA201 FAMILY
TABLE 26-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter
No.
Typical⁽¹⁾
Max
Units
Conditions
Power-Down Current (IPD): PMD Bits are Set, PMSLP Bit is ‘0’⁽²⁾
DC62
0.650
-40°C
DC62a
DC62b
0.450
0.650
0.650
+25°C
μA
+60°C
DC62c
0.650
+85°C
DC62d
0.980
-40°C
DC62e
DC62f
0.730
0.980
0.980
+25°C
μA
+60°C
DC62g
0.980
+85°C
DC64
7.10
-40°C
DC64a
DC64b
7.10
+25°C
5.5
μA
7.80
+60°C
1.8V
3.3V
1.8V
Timer1 w/32 kHz Crystal: T132
(SOSC – LP)⁽³⁾
DC64c
DC64d
DC64e
DC64f
DC64g
DC63
8.30
+85°C
7.10
-40°C
7.10
+25°C
6.2
μA
3.3V
7.80
+60°C
8.30
+85°C
6.60
-40°C
HLVD^(3,4)
DC63a
DC63b
DC63c
Note 1:
2:
3:
4:
5:
6.60
+25°C
4.5
μA
3.3V
6.60
+60°C
BOR^(3,4)
6.60
+85°C
Data in the Typical column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and pulled
high. WDT, etc., are all switched off.
The Δ current is the additional current consumed when the module is enabled. This current should be added to
the base IPD current.
Current applies to Sleep only.
Current applies to Deep Sleep only.
DS39937B-page 192
Preliminary
© 2009 Microchip Technology Inc.