PIC24F04KA201 Datasheet, PDF (191/224 Pages) Microchip Technology – 14/20-Pin General Purpose, 16-Bit Flash Microcontrollers with nanoWatt XLP™ Technology

PIC24F04KA201 FAMILY
TABLE 26-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter No. Typical⁽¹⁾
Max
Units
Conditions
IDD Current
DC31
28
-40°C
DC31a
DC31b
28
8
μA
28
+25°C
+60°C
1.8V
DC31c
DC31d
28
+85°C
LPRC (31 kHz)
55
-40°C
3.3V
DC31e
DC31f
55
15
μA
55
+25°C
+60°C
DC31g
55
+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: Operating Parameters:
• EC mode with clock input driven with a square wave rail-to-rail
• I/O configured as outputs driven low
• MCLR – VDD
• WDT FSCM disabled
• SRAM, program and data memory active
• All PMD bits set except for modules being measured
TABLE 26-7: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 1.8V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param No. Typical⁽¹⁾
Max
Units
Conditions
Idle Current (IIDLE): Core Off, Clock on Base Current, PMD Bits are Set⁽²⁾
DC40
100
-40°C
DC40a
DC40b
100
48
μA
100
+25°C
+60°C
1.8V
DC40c
100
DC40d
215
+85°C
-40°C
0.5 MIPS,
FOSC = 1 MHz
DC40e
DC40f
215
106
μA
215
+25°C
+60°C
3.3V
DC40g
215
+85°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Operating Parameters:
• Core off
• EC mode with clock input driven with a square wave rail-to-rail
• I/O configured as outputs driven low
• MCLR – VDD
• WDT FSCM disabled
• SRAM, program and data memory active
• All PMD bits set except for modules being measured
© 2009 Microchip Technology Inc.
Preliminary
DS39937B-page 189